698430

Bosch MC812 Manual

23
Zoom out
Zoom in
Previous page
1/260
Next page
23
en Citrus press
Asian vegetable disc
For slicing fruit and vegetables into
fine strips for Asian vegetable dishes.
Note: Attach french fries disc or Asian
vegetable disc with the blade facing up.
Discs suitable for other purposes are
available from specialist outlets (see
chapter “Special accessories”).
Pusher with insert
X Fig. F
The pusher can be used in two variants.
Variant 1: For e.g. herbs, leeks, carrots.
Insert the pusher in the opening of the lid.
Push down the food to be processed with
the pusher insert.
Variant 2: For e.g. apples, potatoes.
Position the pusher insert in the pusher and
rotate until both parts are connected. Push
down the food to be processed with the
pusher.
X Fig. G
1. Attach the bowl. Observe the
marking (.) when doing so. Rotate the
bowl clockwise as far as possible.
2. Place the drive shaft on the drive.
3. Take the disc out of the protective cover.
Place the disc on the disc holder. Turn
the desired slicing / shredding side to
face up. Place the disc on the disc
holder so that the drive couplings on the
holder engage with the disc openings.
The disc must rest on the lateral lugs of
the disc holder.
4. Attach the disc holder to the drive shaft,
rotating it slightly.
5. Attach the lid with the pusher. Observe
the marking (.) when doing so.
6. Rotate the lid clockwise as far as
possible.
7. Insert the mains plug. Set the rotary
switch to the desired setting.
8. Add the ingredients for slicing or
shredding and push down with the
pusher, applying light pressure. Cut
beforehand if necessary.
After processing, set the rotary switch to
P. Disconnect the mains plug.
Clean all parts immediately after use.
Doing so prevents residue from drying
on. X “Cleaning and maintenance” see
page 27
Caution!
Finish processing and empty the bowl
before the processed food reaches the
lower edge of the disc holder.
Note: Add chocolate before switching on
and cover with the pusher. After switching
on, push down with the pusher.
Citrus press
For squeezing juice out of citrus
fruits, e.g. oranges, grapefruits and lemons.
Caution!
The citrus press must be completely
assembled before use.
X Fig. H
1. Attach the bowl. Observe the
marking (.) when doing so. Rotate the
bowl clockwise as far as possible.
2. Place the drive shaft on the drive.
3. Place the strainer basket on the drive
shaft. Observe the marking (.) when
doing so. Turn the strainer basket
clockwise. The lug on the strainer
basket must be fully inserted in the slot
in the bowl handle.
4. Attach and press on the pressing cone.
5. Insert the mains plug.Set the rotary
switch to the setting min.
6. Press one half of the citrus fruit down on
the pressing cone. The juice will run into
the container.
After processing, set the rotary switch to
P. Disconnect the mains plug.
Clean all parts immediately after use.
Doing so prevents residue from drying
on. X “Cleaning and maintenance” see
page 27
Caution!
Check the fill level. Maximum processing
quantity: 1000 ml fruit juice.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch MC812 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch MC812 in the language / languages: All languages as an attachment in your email.

The manual is 17,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info