297128
17
Zoom out
Zoom in
Previous page
1/25
Next page
This menu offers you the possibility of setting some
of the telephone's options according to your own
personal wishes.
How to set up options
1. Press
MENU
2. Select
Phone setup
using
3. Confirm by pressing
SELECT
4. Select using either
Language
Dial setup
Network selection
Power saving
Car kit
Greeting
Time & date
Event auto delete
Factory settings
5. Confirm by pressing
SELECT
6. Make your selection using
7. Confirm by pressing
OK
Language selection
The display language of your phone is normally
the national language of the country in which you
purchased your SIM card. If this is not the case the
display language will be English. You have the
option of choosing between different languages.
(See page 10 for how to select language).
Dial setup
Automatic redial
If the phone number you are calling is busy or
your call is not answered, you can let your
phone make up to 10 automatic redial attempts.
A special redialling success tone sounds when the
attempt is successful. To cancel the auto redialling
attempts just press the left function key.
Speed dialling
To speed dial using your location numbers, you
have to select
Speed dialling on
. If you
do not want to make use of this feature, select
Speed dialling off
.
Any key answer
You can answer an incoming call by pressing any
key you like except for the left function key and
the arrow keys if you select
Any key answer on
.
Incoming call setup (fax/data)
Do not enter this menu unless you are using your
phone for fax and data communications! Fax and
data capability will require a separate data interface
kit (optional). The menu settings are explained in
the user guide supplied with this kit.
Network selection
When you wish to use your phone abroad, you
have to select a foreign network. This can be done
either manually or by letting your telephone do it
for you automatically.
In the automatic mode, your phone will auto-
matically try to reach your home network first,
then, alternatively to find another available net-
work stored in a preferred list made by you (see
page 34).
In the manual mode, the phone will always start
searching for the network with which it was in
contact when it was switched off. If the phone
cannot locate this network it will present some
alternative networks on the display, and you can
then select one manually.
You can select any network from the list, but your
phone can get in contact only with cooperating
networks (Roaming). The telephone can get into
contact with other networks but only for emer-
gency calls.
Your dealer or network operator can tell you
which networks are co-operating.
33
PHONE SETUP
How to adjust tones
1. Press
MENU
2. Select
Tones setup
using
3. Confirm by pressing
SELECT
4. Select using either
Ringing tone
Trembler
(Optional extra)
Message tone
Broadcast tone
Key tone
Factory settings
5. Confirm by pressing
SELECT
6. Select the volume or pattern you want
to change using
7. Confirm by pressing
OK
Ringing volume level
and ringing tones
You can adjust the ringing volume level and
select the ringing tones according to your sur-
roundings and preferences.
Ringing volume levels are high, medium, low,
escalating and off. The LED on top of the phone
will emit a fast green flash to indicate an incoming
call. If the ringing tone is set to
off
you will see
the symbol on the standby display.
You have the option of selecting between 27 dif-
ferent ringing tone patterns.
The selected ringing tone will sound at the relevant
ringing volume level when making your selection.
You can disable all kinds of tones by pressing
MENU
and then . In that case the symbol
will be seen in the display. Just press
MENU
and
again to revert to your original settings.
Trembler
If you have a trembler battery you can select
whether the trembler should be active or not
at an incoming call or SMS message and an oc-
curring event.
Message tone
Your telephone can alert you to the arrival of a
SMS message by means of different alert tones.
Keypad tone
To help you keep check on your dialling, the
phone can be set to give 8 different tone patterns
following every key pressed.
Factory settings
You can always return to the original tones setup
of your phone. The phone is set up by the manu-
facturer as follows:
Ringing volume
level: Loud
Ringing tone: British
Trembler: Off
Message tone: Simple
Broadcast tone: Discreet 1
Key tone: 3
TONES SETUP
32
GSM 909 DUAL S GB 10/11/99 15:13 Side 32
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch m com 909s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch m com 909s in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info