660380

Bosch LTC8016 Manual

17
Zoom out
Zoom in
Previous page
1/24
Next page
EN
|
17
Bosch Security Systems | 18 August 2005
LTC 8016/90 | Instruction Manual | Typical Configuration Diagrams
4.8.1 Connecting to DiBos Digital Video
Recorders
A RS-232 grade data cable (not supplied) is required
to connect the DiBos DVR to the LTC 8016 Interface
Unit. A Bosch Security System’s S1385 cable can be
purchased separately, or one can be constructed based
on the pinouts in the CONNECTOR AND CABLE
PINOUTS Section.
Connect one end of the RS-232 data cable to an
available COM port on the DiBos, and the other end
of the cable to the PC port on the Interface Unit. The
DiBos software must now be configured to send the
biphase PTZ commands out the COM port. For
details on this configuration option, refer to the
appropriate section in the DiBos instruction manual.
4.8.2 Connecting to DESA and DESA-8 Series
Digital Video Recorders
A RS-232 grade data cable (not supplied) is required
to connect the DESA DVR to the LTC 8016 Interface
Unit. A Bosch Security System’s S1385 cable can be
purchased separately, or one can be constructed based
on the pinouts in the CONNECTOR AND CABLE
PINOUTS Section.
Connect one end of the RS-232 data cable to the
COM2 port on the DESA, and the other end of the
cable to the PC port on the Interface Unit. The
DESA software must now be configured to send the
biphase PTZ commands out of its COM2 port (rather
than the default COM1 port). For details on this
configuration option, refer to the appropriate section
in the DESA instruction manual.
4.8.3 Connecting to DESA
XL
Series Digital
Video Recorders
A user-supplied RS-232 grade data cable is required to
connect the DESA
XL
DVR to the LTC 8016 Interface
Unit. The interface cable must either be purchased
locally, or constructed based on the pinouts in the
CONNECTOR AND CABLE PINOUTS Section.
Connect one end of the RS-232 data cable to the end
of the Watchdog/PTZ cable connected to the DESA’s
COM1 port, and the other end of the cable to the PC
port on the Interface Unit.
Data
Video + Data
Control
Data
Typical DVR or Other biphase-
enabled Controller
BOSCH
POWER
Biphase
Data
1 m LTC 8508/01
16-Channel Ribbon-
to-BNC Cable
(sold separately)
Video
Signals
16-Channel
LTC 8016/90
Allegiant Bilinx
Interface Unit
Bilinx-enabled
AutoDomes
Bilinx-enabled
Dinion Series
Cameras
BOSCH
Divar Digital Versatile Recorder
SEARCH
B
ACK
ALT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16LIVE
F2F1
ESC
A
Video
Video
BOSCH
Figure 12 Typical Interface Unit Connected to DVR Control Unit
5.0 TYPICAL CONFIGURATION
DIAGRAMS
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch LTC8016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch LTC8016 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info