786506

Bosch LR 7 Professional Manual

19
Zoom out
Zoom in
Previous page
1/301
Next page
English | 19
switch itself off to preserve battery life. The switching off is indicated by all LEDs and all
display indicators lighting up briefly, and an audio signal sounds.
Selecting the Setting of the Centre Line Indicator
You can use the button adjusting the reception accuracy(2) to specify the accuracy with
which the position of the laser beam is indicated as "centred" on the reception area:
– Reception accuracy "fine" (indicator(f) on the display),
– Reception accuracy "coarse" (indicator(e) on the display).
Direction Indicators
The position of the laser beam in the reception area(5) is indicated as follows:
– By the direction "Laser beam below centre line"(b), "Laser beam above centre
line"(d) or centre line indicator(c) on the display(6) on the front of the laser re-
ceiver,
– By the direction LEDs "Laser beam below centre line"(9), "Laser beam above centre
line"(11) or centre line indicator(15) on the back of the laser receiver,
– By an audio signal (optional)(see "Laser Beam Indicator Audio Signal", page19).
Laser receiver too low: If the laser beam runs through the upper half of the reception
area(5), then the direction indicator "Laser beam above centre line"(d) on the display
and the corresponding LED "Laser beam above centre line"(11) will light up.
If the audio signal is switched on, a signal sounds at a high frequency.
Move the laser receiver upwards in the direction of the arrow.
Laser receiver too high: If the laser beam runs through the lower half of the reception
area(5), then the direction indicator "Laser beam below centre line"(b) on the display
and the corresponding LED "Laser beam below centre line"(9) will light up.
If the audio signal is switched on, a signal sounds at a low frequency.
Move the laser receiver downwards in the direction of the arrow.
Laser receiver centred: If the laser beam runs through the reception area(5) at the
height of the centre mark(10), then the centre line indicator(c) on the display and the
corresponding centre line LED(15) will light up.
If the audio signal is switched on, a continuous tone sounds.
Laser Beam Indicator Audio Signal
The position of the laser beam on the reception area (5) can also be indicated by an au-
dio signal.
The volume level can be changed or the audio signal switched off.
To change the volume level or switch off the audio signal, push the audio signal button
(4) until the required volume level is indicated on the display. At a low volume, the audio
Bosch Power Tools 1 609 92A 7LX | (02.05.2022)
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch LR 7 Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch LR 7 Professional in the language / languages: All languages as an attachment in your email.

The manual is 4.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info