544297

Bosch LR 2 Manual

16
Zoom out
Zoom in
Previous page
1/239
Next page
16 | English
1 609 92A 05F | (20.12.12) Bosch Power Tools
Operation
Initial Operation
Protect the measuring tool against moisture and direct sun light.
Do not subject the measuring tool to extreme temperatures or variations in
temperature. As an example, do not leave it in vehicles for long time. In case of
large variations in temperature, allow the measuring tool to adjust to the ambient
temperature before putting it into operation. In case of extreme temperatures or
variations in temperature, the accuracy of the measuring tool can be impaired.
Setting Up the Measuring Tool (see figure A)
Position the measuring tool at least 5 m away from the cross-line laser. Switch on the
pulsating function on the cross-line laser, and select horizontal or vertical operation.
Note: Do not select cross-line operation, as otherwise faulty indications on the height
of the laser beam can occur.
Position the measuring tool in such a manner that the laser beam can reach the recep-
tion area 10. Align the measuring tool in such a manner that the laser beam runs lat-
erally through the reception area (as shown in the figure).
Switching On and Off
A loud audio signal sounds when switching on the measuring tool. Therefore,
keep the measuring tool away from your ear or other persons when switching
on. The loud audio signal can cause hearing defects.
To switch on the measuring tool, press the On/Off button 2. All display indicators as
well as all LEDs light up briefly and an audio signal sounds.
To switch off the measuring tool, press the On/Off button 2 again. Before switching
off, all LEDs briefly light up.
When no button is pressed on the measuring tool for approx. 20 minutes and when no
laser beam reaches the reception area 10 for 20 minutes, the measuring tool auto-
matically switches off in order to save the battery. The switching off is indicated by
brief lighting up of all LEDs.
Selecting the Setting of the Centre Indicator
With button 1, you can specify with which accuracy the position of the laser beam is
indicated as central on the reception area:
– “Fine” adjustment (indication g on the display),
– “Coarse” adjustment (indication f on the display).
Whenever switching on the measuring tool, the accuracy level “coarse” is set.
OBJ_BUCH-821-003.book Page 16 Thursday, December 20, 2012 12:37 PM
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch LR 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch LR 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info