774644
21
Zoom out
Zoom in
Previous page
1/78
Next page
en
21
Aligning the appliance
Note
To ensure that it functions properly, the appliance must
be aligned using a spirit level.
1. Move the appliance into its intended installation
position.
2. Screw the feet in/out until the appliance is exactly
aligned.
Changing the door hinge
We recommend to have the door hinge changed by our
customer service. How much a door hinge change will
cost you can find out contacting customer service.
m Warning
When the door hinge is changed, the appliance must
not be connected to the power supply. Please pull the
mains plug beforehand.
Required tools
Changing door hinge of the appliance
door
1. Open the appliance door and unhinge and remove
all fittings from inside the appliance (see section
headed Fittings).
2. Unscrew the 2 screws (1).
3. Take off the cover plate (2) and set it down on a
soft surface.
Hold on to the appliance door!
4. Unscrew the 2 screws (3).
5. Unscrew the 2 screws (4).
6. Remove the top hinge (5).
7. Unhook the appliance door and set it down on a
soft surface.
8. To avoid damaging the appliance rear side, provide
cushioning material. Place the appliance carefully
onto its rear side.
8 mm hex nut driver
10 mm hex nut driver
Cross-shaped screwdriver
Thin-blade screwdriver
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch KTL15NWFAG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch KTL15NWFAG in the language / languages: German, Dutch, French, Italian as an attachment in your email.

The manual is 2.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch KTL15NWFAG

Bosch KTL15NWFAG User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info