en
15
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the °C button repeatedly until
the display shows SI. In the second
display, a value appears between
0 (no reception) and 3 (full reception).
Note
The signal strength should be at least
2. If the signal strength is too low, the
connection could be interrupted. Place
the router and the refrigerator closer
together, ensure that the connection is
not disturbed by shielding walls or
install a repeater to strengthen the
signal.
Activating the cameras
You can use this function to check via
the app at any time what is in your
refrigerator.Whenever the refrigerator
compartment door is closed, the
cameras take a photo of the refrigerator
compartment and the refrigerator
compartment door.
Note
The cameras only take one photo at this
moment. This ensures protection of your
privacy.
If your refrigerator is connected to both
your home network (WLAN) and the
Home Connect app, you can activate the
cameras:
1. Press super button and lock/alarm off
button simultaneously to open the
HomeConnect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press
lock/alarm off button again until the
lock is deactivated.
2. Press °C button repeatedly until the
displays CA and oF are shown.
3. Press + button to activate the
cameras.
The display shows on, the cameras
are activated.
Note
If the cameras are activated and the
refrigerator contents are interrogated
frequently via the app, this will result in
increased data transfer.
Note
Uploading the photos takes up to three
minutes.
Note
Various external factors in home network
and the Internet can cause transmission
problems and pictures to be discarded.
These have no effect on the appliance’s
basic functions.
Deactivating the cameras:
1. Press super button and lock/alarm off
button simultaneously to open the
HomeConnect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press
lock/alarm off button again until the
lock is deactivated.