665302

Bosch KAD90VB20 Manual

37
Zoom out
Zoom in
Previous page
1/137
Next page
en
37
Connecting the appliance
After setting up the appliance, wait for at least 1 hour
before starting the appliance up. The oil contained in
the compressor may have been displaced into the
refrigeration system during transport.
Before starting the appliance up for the first time, clean
its interior (see section “Cleaning the appliance”).
It is imperative to connect the appliance to the water
supply before establishing the electrical connections.
Do not remove the transit locks from the shelves and
trays until the appliance has been installed.
Water connection
m Warning
Risk of electric shock and damage to property.
Disconnect the appliance from the electricity mains
before carrying out any work on the water connection.
The water connection must only be installed by a
qualified plumber and in accordance with local
legislation and regulations governing water quality.
Connect the appliance to a domestic water supply with
the following specifications:
■ Minimum pressure: 1.0 bar
■ Maximum pressure: 8.0 bar
Contact a plumbing professional if you are uncertain
how to check the current water pressure.
m Caution
If the water pressure is more than 5.5 bar, a pressure-
reducing valve must be fitted; otherwise there is a risk
of water damage. If the water pressure is below
1.0 bar, the ice-maker will not function.
The water tap to which the connecting hose supplied is
connected should be easily accessible.
The appliance may only be connected to a cold water
pipe.
The taste and smell of the water can be improved by
installing the filter cartridge supplied. If doing so, take
note of the different connection specifications (see
section headed Water filter).
Note
After the appliance has been switched on, water can
drip from the water dispenser. After approx. 24 hours,
when the appliance has reached its operating
temperature, the dripping stops.
Connecting
m Caution
Risk of leaks and water damage.
Observe the following points:
■ Do not bend the connecting hose.
■ Cut off the connecting hose evenly.
■ Do not cut off the connection hose with pliers.
■ Put the connection hose all the way onto the screw
socket and the return stop valve.
■ Tighten the screw socket by hand. Do not use pliers.
■ Check the flow direction of the return stop valve.
Arrows on the return stop valve indicate the flow
direction.
1. Insert the connecting hose all the way into the return
stop valve.
2. Close the sleeve at the return stop valve and fasten
with a screw.
3. Insert the sieve into the reducing piece.
Note
Clean the sieve every year. If there are many particles
in the water, clean the sieve more frequently.
approx.
65 cm
approx.
33 cm
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch KAD90VB20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch KAD90VB20 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info