Manual Bosch IXO IV (page 30 of 186) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

119969

Zoom out

Zoom in

1/186

2 609 005 792 | (25.10.11) Bosch Power Tools

30 | English

During the charging procedure, the handle of the machine warms up. This

is normal.

Disconnect the battery charger from the mains supply when not using it

for longer periods.

The power tool cannot be used during the charge procedure; it is not de-

fective when inoperative during the charging procedure.

f Protect the battery charger against moisture!

Observe the notes for disposal.

Changing the Tool (see figure B)

f Do not use double-sided screwdriver blades that are longer than

25 mm.

Insert the screwdriver bit 1 directly into the tool holder 2.

Eccentric Driver Head/Angle Driver Head/Torque Attach-

ment (see figures C

– F)

The eccentric driver head 13 enables screwdriving close to edges.

The angle driver head 14 enables screwdriving at hard to reach locations.

With the torque presetting ring 16 on the torque attachment 15, the re-

quested torque can be preset in 10 steps. With the correct setting, the

tool bit is stopped as soon as the screw is driven flush into the material or

when the set torque is reached.

Assembly (see figures C–D)

For assembly of the attachments, pull the rubber cap 3 off toward the

front. Afterwards the attachments can be mounted. The attachments can

be mounted offset by 45°.

Dismounting (see figures E–F)

To dismount the attachments, turn the release ring 18 in rotation direc-

tion n and pull the attachment off toward the front. Afterwards, mount

the rubber cap 3 again.

OBJ_BUCH-826-006.book Page 30 Tuesday, October 25, 2011 2:37 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch IXO IV in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch IXO IV

Bosch IXO IV User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish - 260 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch IXO IV Manual

Product: