Manual Bosch IP micro 2000 (page 79 of 103) (English)

539177

Zoom out

Zoom in

1/103

Camera Browser Interface Setting up VCA | en 87

Bosch Security Systems Software manual AM18-Q0649 | v5.8 | 2013.05

the triggering condition still exists. If the original condition has

been restored before this time interval elapses, the alarm is not

triggered. This avoids false alarms triggered by short-term

changes, for example, cleaning activities in the direct field of

vision of the camera.

Global change (slider)

Set how large the global change in the video image must be for

an alarm to be triggered. This setting is independent of the

sensor fields selected under Select Area. Set a high value if

fewer sensor fields need to change to trigger an alarm. With a

low value, it is necessary for changes to occur simultaneously in

a large number of sensor fields to trigger an alarm. This option

allows detection, independently of motion alarms, manipulation

of the orientation or location of a camera resulting from turning

the camera mount bracket, for example.

Global change

Activate this function if the global change, as set with the

Global change slide control, should trigger an alarm.

Scene too bright

Activate this function if tampering associated with exposure to

extreme light (for instance, shining a flashlight directly on the

objective) should trigger an alarm. The average brightness of

the scene provides a basis for recognition.

Scene too dark

Activate this function if tampering associated with covering the

objective (for instance, by spraying paint on it) should trigger

an alarm. The average brightness of the scene provides a basis

for recognition.

Scene too noisy

Activate this function if tampering associated with EMC

interference (noisy scene as the result of a strong interference

signal in the vicinity of the video lines) should trigger an alarm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch IP micro 2000 in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch IP micro 2000 Manual

Product: