Manual Bosch Indego XS 300 (page 24 of 318) (All languages)

764283

Zoom out

Zoom in

1/318

24 | English

Action Figure Page

Laying perimeter wire around new in-

ner object E304

Lifting up and carrying the mower F305

Setting the height of cut G305

Adding a further lawn area

– with additional docking station

(right)

– without additional docking station

(top left)

H306

Cleaning I307

Maintenance J307

Software update K308

Installation

With the following QR code, you can view a video on how to

install the mower under www.bosch-diy.com/indego-help.

Alternatively, follow the Installation Guide delivered with the

product.

Check if the perimeter wire is fully pegged to

the ground avoiding any slack lengths of wire.

Any loose wire can be a trip hazard.

Remove stones, loose pieces of wood, wire, live mains

cables and other foreign objects from the cutting area.

Make sure that the cutting area is even and has no ditches,

grooves and steep slopes above 15°/27% that are clear ob-

structions for the mower.

The docking station must be positioned on the wire at an

outer edge of the cutting area. It may not be positioned on

the side of a tool or garden shed standing as an island within

the lawn to be mowed.

It is recommended that you mow your lawn once with a con-

ventional lawnmower before installing and before the first

mowing of the new season and whenever the grass clippings

would be longer than 5 mm.

The mower's cutting system is designed to cut small lengths

of grass (30–50mm). The clippings can remain as mulch to

fertilize the lawn. The height of cut for mower can be adjus-

ted to 30, 40 and 50mm.

It is recommended to start with a higher setting and then

gradually decrease the height of cut as the wire disappears

under the grass. This prevents your Indego from cutting the

wire.

Additional perimeter wire can be added using a wire con-

nector (see figures D–E).

The perimeter wire can be extended up to a maximum length

of 250m.

The perimeter wire can be buried up to 5 cm under the

ground (or under non-metallic slabs).

To avoid causing damage to the perimeter wire, do not verti-

cut or rake the area where it is positioned.

When laying out the wire avoid angles of less than 45°. This

can affect the performance.

Display

Symbol Meaning

➊Back button

➋Confirm button

If the confirm button is pressed whilst mow-

ing, the mower will return to the docking

station

➌○ Red LED on: mower error

➍○ Green LED on: mower is switched on

Green LED off: The mower is inactive and

your four-digit PIN code is required for ac-

tivation.

Or the mower is shut off, the isolator switch

must be turned on and your four digit PIN

code must be entered to activate the

mower.

Note: during a software update, the green

LED and red LED will be on.

➎Left/right button

➏Down/up button

➐Display with dialog screen

➑1 2 3Garden number (shown when more than

one garden map in the mower memory)

The display switches into sleep mode, if no input is made for

10 minutes.

Adding a further Lawn Area (see

figure H)

To install the Indego to an additional lawn area, please follow

the instructions in the Installation Guide.

F 016 L94 037 | (11.11.2020) Bosch Power Tools

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Indego XS 300 in the language / languages: All languages as an attachment in your email.

The manual is 4,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Indego XS 300 Manual

Product: