764284

Bosch Indego S 500 Manual

27
Zoom out
Zoom in
Previous page
1/356
Next page
English | 27
Display
Symbol Meaning
➊Back button
➋Confirm button
If the confirm button is pressed whilst mow-
ing, the mower will return to the docking
station
➌○ Red LED on: mower error
➍○ Green LED on: mower is switched on
Green LED off: The mower is inactive and
your four-digit PIN code is required for ac-
tivation.
Or the mower is shut off, the isolator switch
must be turned on and your four digit PIN
code must be entered to activate the
mower.
Note: during a software update, the green
LED and red LED will be on.
➎Left/right button
➏Down/up button
➐Display with dialog screen
➑1 2 3Garden number (shown when more than
one garden map in the mower memory)
Only with Indego S+ 500 and M+ 700:
➒Network signal present
Network signal absent
The display switches into sleep mode, if no input is made for
10 minutes.
Adding a further Lawn Area (see
figure K)
To install the Indego to an additional lawn area, please follow
the instructions in the Installation Guide.
Separate lawn area with separate docking station (see
figure K, right side): The mowercan be used on up to three
different lawn areas. For an additional lawn area, a separate
docking station (see figure A) and the necessary perimeter
wire and pegs are required. If a schedule or the “Bosch
AUTO” calendar function or the Bosch ”SmartMowing”
functionality is set, the grass of the area it is in will be cut,
within the defined time slots.
Switch off the mower when transporting it between the indi-
vidual lawn areas.
Note: software updates have to be carried out on the mower
in every docking station.
To ensure remembering which docking station belongs to
which lawn area, it is recommended to label the docking sta-
tions with the lawn area number and description when stor-
ing them for winter.
Without separate docking station: It is possible to connect
the lawn areas by placing the perimeter wire between the
two lawn areas parallel to each other as close as possible
(see figure K, top left). The additional lawn area without
docking station is not recorded in the map memory and the
mower will not use the LogiCut cutting strategy in this lawn
area without the docking station. The maximum recommen-
ded lawn area without docking station is 45/50m2 (for In-
dego 500/700 models). The mower will mow until it runs
out of battery and will need to be carried back to the docking
station for charging.
Mowing
uDo not let children ride the mower.
uPress the stop button on top of the mower before lift-
ing. Always lift the mower by its handle. (see figureF)
Only with Indego S500 and M700: After successful install-
ation you can either immediately begin to mow by confirming
“Mow now” on the display, or wait for the next scheduled
cutting period, as programmed by the “Bosch AUTO” Calen-
dar Function (previous setting required).
A manual mowing schedule can also be set up according to
your specific needs.
Only with Indego S+500 and M+700: After successful in-
stallation, you can begin mowing immediately by confirming
“Mow now” on the display, or on the free Bosch Smart
Gardening App by pressing "mow”. You could also set up a
programmed schedule, using the Bosch "SmartMowing"
functionality, which can also plan future cutting sessions
based on when it is forecasted to rain. You could also set up
a programmed schedule in the calendar using the display or
the Bosch Smart Gardening App.
The mower must mow a lawn area 3 times completely (do 3
full cuts) to learn the lawn area. During the learning phase,
the visual result may not be optimal.
Approximate runtimes for complete lawn area coverage us-
ing LogiCut are listed below. Please note that the runtimes
will vary depending on the lawn complexity and number of
objects within the lawn area.
100m24h
500m216h
700m222h
Set a schedule with frequent repetitions. This achieves good
mowing results, the battery charge will last longer and you
avoid debris on the lawn.
When the mower is mowing
In “manual” mode, the mower works until the lawn is
mowed. Mowing is interrupted only for charging the battery.
Bosch Power Tools F 016 L94 038 | (11.11.2020)
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Indego S 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Indego S 500 in the language / languages: All languages as an attachment in your email.

The manual is 5,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info