591351
32
Zoom out
Zoom in
Previous page
1/466
Next page
32 | English
F 016 L81 115 | (7.10.14) Bosch Power Tools
Ensure correct installation of the pe-
rimeter wire as instructed.
Check the perimeter wire is fully
pegged to the ground avoiding any
slack lengths of wire.
Periodically inspect the area where
the machine is used and remove all
stones, sticks, wires and other for-
eign objects.
Do not run any live mains cables in
the working area.
Periodically inspect to see that the
blades, blade bolts and cutter assem-
bly are not worn or damaged. Replace
worn or damaged blades and bolts in
sets to preserve balance.
Never operate the machine with de-
fective guards or without safety de-
vices.
Do not put hands or feet near or un-
der rotating parts.
Never pick up or carry the machine
while the motor is running.
Do not leave the machine to operate
unattended if you know that there are
pets, children or people in the imme-
diate vicinity.
Start the machine according to the in-
structions standing well away from
rotating parts.
Do not use the product at the same
time as a sprinkler or use the sched-
ule to ensure that the two systems
never run simultaneously.
Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
Remove the isolator key:
– Before clearing a blockage,
– Before checking, cleaning or working
on the machine,
– if the machine vibrates abnormally
(stop and check immediately),
after striking a foreign object. Inspect
the machine for damage and get ad-
vice on necessary repairs from your
Bosch Service Centre.
Maintenance
Always wear gardening gloves
when handling or working near the
sharp blades.
Before working on the machine it-
self, remove the isolator key.
Before working on the docking sta-
tion or power supply, remove plug
from mains.
Clean the exterior of the machine thor-
oughly using a soft brush and cloth. Do
not use water, solvents or polishes.
Remove all grass and debris, especially
from the ventilation slots.
Turn the machine on its back and clean
the blade area regularly. Use a stiff
brush or scraper to remove compacted
grass clippings. (see figure A)
Blades are reversible. (see figure B)
Keep all nuts, bolts and screws tight
to be sure that the machine is in safe
working condition.
Periodically visually inspect the ma-
chine and replace worn or damaged
parts for safety.
Ensure that only official Bosch re-
placement parts are used.
OBJ_BUCH-1573-007.book Page 32 Tuesday, October 7, 2014 12:49 PM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch Indego 1200 Connect at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Indego 1200 Connect in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch Indego 1200 Connect

Bosch Indego 1200 Connect Installation Guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info