745983

Bosch HRS538BS6B Manual

25
Zoom out
Zoom in
Previous page
1/40
Next page
Shelf supports en
25
Note:Do not pour more than 150 ml of liquid into the
water tank throughout the descaling process.
1. Mixing a descaling solution:
– 50ml liquid descaler
– 100ml water
2. Pour the descaling solution into the water tank and
insert the water tank.
3. Use the function selector to set descaling ⁠.
4. Turn the temperature selector.
a appears in the display. Descaling starts after a
few seconds.
aAt the end of the descaling programme, ap-
pears in the display.
5. Remove the water tank and clean thoroughly with
water.
17.2 Second step ( ⁠ ⁠ ⁠)
1. Fill the water tank with 150ml water and insert it.
aAt the end of the rinse cycle, appears in the dis-
play.
2. Remove the water tank and clean thoroughly with
water.
17.3 Third step ( ⁠ ⁠ ⁠)
1. Fill the water tank with 150ml water and insert it.
aAt the end of the rinse cycle, appears in the dis-
play.
2. Remove the water tank and clean thoroughly with
water.
17.4 Fourth step ( ⁠ ⁠ ⁠)
1. Fill the water tank with 150ml water and insert it.
aAt the end of the rinse cycle, ⁠ ⁠: appears in the
display.
2. Remove the water tank and clean thoroughly with
water.
3. Dry the water tank and re-insert it.
aDescaling is complete and the appliance is ready
for use again.
17.5 Descaling interrupted
If descaling is interrupted (for example, due to a power
failure or because the appliance is switched off), the
symbol appears in the display after the appliance is
switched back on. You will be prompted to rinse three
times. The appliance cannot be used for other opera-
tions until the third rinse cycle comes to an end.
Note:If you set another operation, (Cleaning) ap-
pears in the display. Repeat the interrupted descaling
programme after rinsing.
1. Empty the water tank and clean thoroughly with wa-
ter.
2. Insert the empty water tank.
3. Use the function selector to set descaling ⁠.
4. Turn the temperature selector.
a appears in the display.
aAfter a few seconds, the appliance pumps the re-
maining liquid into the water tank.
5. Empty the water tank and clean thoroughly with wa-
ter.
6. To rinse the steam system, run the three rinse
cycles in the descaling programme.
→"Second step ( )", Page25
7. Restart descaling.
18  Shelf supports
To clean the rails and the cooking compartment, or to
replace the rails, you can remove these.
18.1 Detaching the shelf supports
WARNING‒Risk of burns!
The shelf supports get very hot
▶Never touch the shelf supports when hot.
▶Always allow the appliance to cool down.
▶Keep children at a safe distance.
1. Lift the rail forwards slightly and detach it ⁠.
2. Pull the whole rail to the front and remove it.
3. Clean the rail.
→"Cleaning products", Page22
18.2 Attaching the shelf supports
Notes
¡The rails only fit on the right or left.
¡For both rails, ensure that the curved rods are at the
front.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HRS538BS6B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HRS538BS6B in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info