551231
10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Malfunction table
Malfunctions often have simple explanations. Please refer to the
malfunction table before calling the after-sales service.
If a meal does not turn out exactly as you wanted, refer to the
Tested for you in our cooking studio section, where you will
find plenty of cooking tips and tricks.
: Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out by one of our trained after-sales engineers.
You can take remedial action yourself for some error
messages.
Troubleshooting
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate bearing these numbers can
be found on the right-hand side when you open the appliance
door. To save time, you can make a note of the number of your
appliance and the telephone number of the after-sales service
in the space below, should it be required.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
This appliance corresponds to the standards EN 55011 and
CISPR 11. It is a Group 2, Class B product.
Error message Possible cause Remedy/note
The appliance does not work The plug is not plugged in. Plug the plug in
Power failure Check whether the kitchen light works.
Faulty circuit breaker Look in the fuse box to make sure that the cir-
cuit breaker for the appliance is in working
order.
Faulty operation Switch off the circuit breaker in the fuse box.
Switch it back on after approx. 10 seconds.
Three zeros light up in the display. Power failure Reset the time.
The appliance is not in operation. A
cooking time appears in the display.
The rotary selector was actuated acciden-
tally.
Press the Stop button.
The Start button was not pressed after set-
ting.
Press the Start button or cancel the setting with
the Stop button.
The microwave does not work. The door was not fully closed. Check whether food residue or debris is
trapped in the door.
The Start button was not pressed. Press the Start button.
It takes longer than before for the
food to heat up
The microwave power level setting was too
low.
Select a higher microwave power setting.
A larger amount of food than usual has
been placed in the appliance.
Double the amount – double the time.
The food was colder than usual. Stir or turn the food during cooking.
The turntable makes a scratching or
grinding noise.
Dirt or debris in the area around the turnta-
ble drive.
Clean the roller ring and the recess in the cook-
ing compartment.
Microwave operation has been can-
celled for no apparent reason.
The microwave has a fault. If this fault occurs repeatedly, please call the
after-sales service.
"M" appears in the display. The appliance is in demo mode. Press and hold the Start button and the Stop
button for approx. 7 seconds.
Demo mode is deactivated.
E no.
FD no.
After-sales service
O
GB 0844 8928979
Calls from a BT landline will be charged at up to 3
pence per minute. A call set-up fee of up to 6 pence may
apply.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HMT75G654 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HMT75G654 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch HMT75G654

Bosch HMT75G654 User Manual - French - 20 pages

Bosch HMT75G654 User Manual - Portuguese, Turkish, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info