532212
17
Zoom out
Zoom in
Previous page
1/60
Next page
17
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Upper glass cover
Before opening the top cover, remove any spills with a cloth.
Use glass cleaner if possible.
For cleaning, remove the top cover. To do this, hold the cover
securely on both sides with both hands and pull it upwards.
If the cover hinges become loose, note the letters marked on
them. The hinge with the letter R must be fitted on the right, and
the hinge with the letter L must be fitted on the left.
After cleaning, re-assemble the top cover following the same
procedure in reverse order.
Only close the top cover once the burners have cooled down.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
scouring pads,
abrasive cleaning agents such as oven cleaner or stain
remover,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
cleaning agent with a high alcohol content,
scouring pads,
high-pressure cleaners or steam jets.
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.
Stainless steel
fronts
Wipe the appliance with plenty of water and some washing-up liquid. Always wipe parallel to the natural
grain. Otherwise, you could scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease,
starch and albumin (e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or
rough cleaning cloths. The stainless steel fronts can be polished using a special care product. Follow the
manufacturer's instructions. You can purchase special stainless steel cleaner from our after-sales service or
from specialist retailers.
Enamel surfaces and
lacquered surfaces
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Burners and steel
grid of the gas burn-
ers
Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing-up liquid and
some hot water. Remove the burner cup and cover. Clean with a sponge and some hot water and washing-
up liquid. Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with
a small, soft brush. The gas burners only work if the igniters are clean. Remove food residue from the
burner shells with some washing-up liquid and a damp cloth. Only use a little water. Water must not be
allowed to enter the appliance. Ensure that the nozzle opening does not become blocked or damaged dur-
ing cleaning. Dry all parts after cleaning and place the burner cover accurately on the burner cup. If the
parts are not positioned accurately, it will be harder to ignite the burner. The burner covers are coated with
black enamel. Due to the high temperatures, discolouration may occur. This will not impair the function of
the burner. Replace the wire rack in the oven.
Electric hob (option) Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the
hob on briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and
food residue immediately.
Metal ring of the
electric hob (option)
The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring
with the hard side of a scouring sponge and some liquid scouring agent. Do not touch the adjacent sur-
faces. This could become damaged.
Knobs Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
Glass panel Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These
could scratch and damage the surface of the glass panel.
Seal Wipe with a damp cloth. Dry with a soft cloth.
Oven floor, ceiling
and side panels
Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces. Never
apply to the back panel.
Glass cover on the
oven light
Wipe with some washing-up liquid and a damp cloth. Dry with a soft cloth.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HGV74W257N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HGV74W257N in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info