677783
17
Zoom out
Zoom in
Previous page
1/64
Next page
17
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer
U, the cooking time r, the end time p or
the actual time
0, press the 0 sensor repeatedly until the
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.
Time
Once the oven has been connected or after a power cut, a
flashing
0 symbol and four zeros are shown on the display
panel. Set the time.
1. Press the 0 button.
The display panel displays the time
‚ƒ.‹‹.
2. Set the time with the buttons @ or A.
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
1. Press the 0 button four times.
The time symbols light up on the display panel, the brackets
are located next to
0.
2. Adjust the time with the buttons @ or A.
The programmed time is displayed after a few seconds.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Childproof lock
The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
When the heating type and temperature or grill level are
programmed, the childproof lock turns off the heating.
Activating the childproof lock
No cooking time or end time should already be set.
Press the
D button for approximately four seconds.
The display panel shows the symbol
D. The childproof lock is
now activated.
Turning off the childproof lock
Press the
D button for approximately four seconds.
The
D symbol in the display panel goes off. The childproof
lock is now deactivated.
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
No other time function can be programmed.
1. Press the 0 button for approximately 4 seconds.
The display panel will show the current basic setting for the
time, e.g.
™‚ for the Selection .
2. Set the basic setting using the buttons @ or A.
3. Confirm with the 0 button.
The display panel shows the following basic setting. Using
the button
0 select the levels and using the buttons @ or A
make the setting.
4. Press the 0 button for approximately 4 seconds.
All basic settings have been applied.
The basic settings can be changed again at any time.
Basic settings
Selection
Selectionƒ
Selection
™‚
Time indicator always* only with
the
button
0
-
™ƒ
Duration of signal
after the cooking
time or the time set
on the timer has
elapsed
approx.
10 sec
approx.
2 min.*
approx.
5 min
™„
Time until a setting is
applied
approx.
2 sec
approx.
5 sec.*
approx.
10 sec.
* Default setting
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HGD745257N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HGD745257N in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info