773195
14
Zoom out
Zoom in
Previous page
1/32
Next page
en Childproof lock
14
10.3 Preparing food for the programme
Use fresh and, ideally, chilled food.
1. Weigh the food.
The weight of the food is required in order to cor-
rectly set the programme.
2. Add the food to the cookware.
3. Place the cookware onto the wire rack.
Always place the cookware into the cooking com-
partment while it is cold.
10.4 Setting a programme
The appliance selects the optimal type of heating, tem-
perature and cooking time. All you need to do is set
the weight.
Notes
¡You can set the weight only in the intended area.
¡After the programme starts, you can no longer
change the programme and the weight.
1. Use the function selector to set Programme ⁠.
2. The temperature selector must remain in the "Off"
position ⁠.
3. Use the or button to set the required pro-
gramme.
4. Press the button.
5. Use the or button to set the weight of your
food. Always set the next higher weight.
The display shows the calculated cooking time.
The cooking time cannot be changed.
For some programmes, the button can be
used to delay the end.
→"Setting the end time", Page12
To change the programme, press the button.
aAfter a few seconds, the programme starts and the
cooking time counts down.
aIf the programme has ended, an audible signal
sounds and the display shows the cooking time as
zero.
6. When the programme ends:
Press any button to end the audible signal pre-
maturely.
To set a cooking time for further cooking, press
the button. The appliance continues to heat
using the programme settings.
When your food is ready, switch off the appli-
ance.
11  Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Note:You can go to the basic settings →Page14 to
specify whether you want the option to set the child-
proof lock.
11.1 Activating and deactivating the
childproof lock
Requirement:The function selector must be set to the
"Off" position ⁠.
To activate the childproof lock, press and hold the
button until appears in the display.
To deactivate the childproof lock, press and hold
the button until goes out in the display.
12  Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
Signal duration upon completion of a time or
timer period
= 10 seconds
= 30 seconds1
= 2 minutes
Waiting time until a setting is applied = 3 seconds1
= 6 seconds
= 10 seconds
Button tone when pressing a button = off
= on1
Brightness of the display illumination = dark
= medium1
= bright
1Factory setting (may vary according to model)
2Depending on the appliance specifications
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HBS573BB0B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HBS573BB0B in the language / languages: English as an attachment in your email.

The manual is 3.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info