551196
25
Zoom out
Zoom in
Previous page
1/36
Next page
25
2. Select the desired programme number using the rotary
selector.
3. Press the X button.
A weight is suggested in the clock display.
4. Use the rotary selector to specify the weight of the dish.
5. Press the n button.
The programme length is shown.
The programme starts. You will see the cooking time [
r]
counting down on the clock display.
The programme has ended
A signal sounds. The oven stops heating. You can cancel the
signal earlier by pressing the
0button.
Changing the programme duration
The duration of the programme cannot be changed.
Changing the programme
Once a programme has been started, it can no longer be
changed.
Opening the oven door during cooking
Operation is suspended. When the door is closed again,
operation resumes.
Pausing operation
Press the
n button briefly. The oven is paused. Press the n
button again to continue operation.
Cancelling the programme
Press and hold
nbutton until the <symbol for 3D hot air and
160 °C appear. You can now change the settings.
Setting a later end time
See the section entitled Time-setting options - Setting a later
end time.
Tips for the automatic programmes
The weight of the joint or poultry is
greater than the weight ranges availa-
ble.
The weight range is deliberately limited. For very large joints, it is often impossible to
obtain a sufficiently large roasting dish. Prepare large pieces with
% Top/bottom heating
or
4 Hot air grilling.
The joint has cooked well, but the juices
are too dark.
Select a smaller dish or use more liquid.
The joint has cooked well, but the juices
are too clear and watery.
Select a larger dish or use less liquid.
The joint is too dry on the top. Use a dish with a tightly fitting lid. Very lean meat will remain more succulent if it is cov-
ered with rashers of bacon.
The joint looks good, but there was a
burning smell during roasting.
The lid of the roasting dish is not closed properly, or the meat has expanded and has
pushed up the lid. Always use the right lid for your ovenware. Make sure that there is at
least 3 cm between the meat and the lid.
You wish to prepare frozen meat. Season frozen meat in the same way as fresh meat. Caution: For frozen meat it is not
possible to delay the end time. The meat would defrost during the waiting time and would
be inedible.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HBM56B551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HBM56B551 in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch HBM56B551

Bosch HBM56B551 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info