448733
12
Zoom out
Zoom in
Previous page
1/40
Next page
12
Cancelling operation
Press and hold the
n button until “Select function” appears.
You can now change the settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Set a cooking time for each step in the series of operations.
1. Press the 2 button.
The button lights up. “SeriesOperations” appears in the
display as the heading. The 1 for the first step in the series of
operations is in brackets.
2. Select and set the desired operating mode.
3. Press the Y button to return to [1] and use the rotary
selector to select [2] for the second step in the series of
operations.
4. Select and set the desired operating mode.
5. Press the Y button to return to [2] and use the rotary
selector to select [3] for the third step in the series of
operations.
6. Select and set the desired operating mode.
7. Press the n button.
Appliance operation begins.
Note: The first step in the series of operations appears in the
display. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Changes can only be made before operation begins.
1. Press the Y button to move upwards until 1, 2 or 3 appears
in the brackets.
2. Use the rotary selector to select the step that you wish to
change.
3. Change the setting.
Cancelling operation
Press and hold the
n button until “Select function” appears.
You can now change the settings.
Time-setting options
You can call up the time-setting options menu by pressing
the
0 button. The following functions are available:
If the oven is switched off:
Setting the timer
Setting the clock
If the oven is switched on:
Setting the timer
Setting the cooking time
Setting a later end time
Setting the time-setting options in brief
1. Press the 0 button to open the menu.
2. Set the desired function by turning the rotary selector.
3. Press the X button to change line and turn the rotary
selector to set the time or cooking time.
4. Press the 0 button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1. Press the 0 button.
The time-setting options menu appears.
2. Press the X button and set the timer run time using the
rotary selector.
3. Press the 0 button to close the time-setting options menu.
The display returns to its previous state. The
U symbol for the
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
U 00:00. You can cancel the signal earlier by pressing the 0
button.
Cancelling the timer time
Press the
0 button to open the time-setting options menu.
Press the
X button and use the rotary selector to turn the time
back to 00:00. Press the
0 button to close the menu.
Changing the timer time
Press the
0 button to open the time-setting options menu.
Press the
X button and in the next few seconds change the
timer time by turning the rotary selector. Press the
0 button to
close the menu.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HBC86P763 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HBC86P763 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch HBC86P763

Bosch HBC86P763 User Manual - German - 44 pages

Bosch HBC86P763 User Manual - Dutch - 40 pages

Bosch HBC86P763 User Manual - Dutch - 104 pages

Bosch HBC86P763 Quick start guide - French - 2 pages

Bosch HBC86P763 User Manual - French - 44 pages

Bosch HBC86P763 User Manual - Italian - 44 pages

Bosch HBC86P763 User Manual - Polish - 44 pages

Bosch HBC86P763 User Manual - Portuguese - 44 pages

Bosch HBC86P763 User Manual - Spanish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info