12
Suitable microwave power settings
Except for 900 watts, you can combine any microwave power
setting with a heating type.
Setting a combination
Example in diagram: Top/bottom heating setting 200 °C and
microwave setting 360 W, 17 minutes.
1. Press the
! button.
“Types of heating” appears as the heading. 3D hot air and
160 °C are suggested in the display.
2. Turn the rotary selector to set the desired type of heating.
3. Press the
X button to switch to the temperature.
4. Use the rotary selector to change the temperature.
5. Press the button for the microwave power setting you require.
The selected button lights up. The heading changes to
“Combination”.
6. Set the cooking time using the rotary selector.
7. Press the
n button.
Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
0 button.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the cooking time
Press the
0 button and turn the rotary selector to change the
cooking time. Press the
0 button.
Opening the oven door during cooking
Operation is suspended. The oven is paused. The
n symbol
flashes on the status bar. Close the door and press the
n
button again. The programme will then continue.
Pausing operation
Press the
n button briefly. The oven is paused. Press the n
button again to continue operation.
Cancelling operation
Press and hold the
n button until the intervention display
appears. You can now change the settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Note: Always set a cooking time for each step in the series of
operations.
1. Press the
2 button.
The button lights up. "SeriesOperations 1" appears in the
display as the heading.
2. Select and set the desired operating mode.
