644845
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
4. Press the 0 sensor.
The time when the dish will be ready and the end time
symbol
y will be shown on the display panel.
5. Delay the end time using the @ or A sensors.
6. Press the ºC sensor.
Set the temperature or required grill power using the
@ or A
sensors.
The programmed temperature and the
y symbol will be shown
on the display panel, and the oven will be set to standby. When
the oven turns on, the programmed temperature and the
x
symbol will be shown. The
y symbol turns off.
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show
‹‹:‹‹. Press the 0 sensor twice. You can set
a new cooking time with the
@ or A sensors, or press the 0
sensor and turn the function control knob to zero. The oven is
switched off.
Changing the end time
Press the sensor
0 three times. Change the end time using
the
@ or A sensors. The altered time is shown after a few
seconds. Do not change the end time if the cooking time has
already started to count down. The final result may not be the
same.
Cancelling the end time
Press the 0 sensor three times and reset the end time to the
current time with the
A sensor. The oven switches on.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
To view the timer
V, the cooking time x, the end time y or
the time
0, press the 0 sensor repeatedly until the required
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
Time
Once the oven has been connected or after a power cut, the 0
and
: ‹‹ symbols light up on the display panel.Set the clock
to the right time.
1. Press the 0 sensor.
The time is displayed
‚ƒ:‹‹.
2. Set the time with the @ or A sensors.
3. Confirm the time with the 0 sensor.
The programmed time is displayed after a few seconds.
Changing the time
No other time function must be programmed, the oven must be
switched off.
1. Press the 0 sensor twice.
The display panel displays
0.
2. Set the time with the @ or A sensors.
3. Confirm the time with the 0 sensor.
The programmed time is displayed after a few seconds.
Hiding the time
The time can be hidden. See the Modifying basic settings
chapter.
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
The oven must be switched off.
1. Press the 0 sensor for approximately 4 seconds.
The display panel will show the current basic setting for the
duration of the signal, e.g.,
™‚ Option ƒ.
2. Change the basic setting using the @ or A sensors.
3. Confirm with the sensor0.
The display panel shows the following basic setting. The
0
sensor allows you to run through all the settings and the
@ or A sensors allow you to modify them.
4. Finally, press the 0 sensor for approximately 4 seconds.
All basic settings have been applied.
The basic settings can be changed again at any time.
Basic setting Option 0 Option 1 Option 2 Option 3
™‚
Duration of signal after the cooking time or the time set
on the timer has elapsed
- approx. 10 sec approx. 2 min* approx. 5 min
™ƒ
Time indicator no yes* - -
™„
Time until a setting is applied - approx. 2 sec approx. 4 sec* approx. 10 sec
™†
The shelf support rails have been refitted. no yes - -
™‡
Select default settings for all values. no* yes - -
* Default setting
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch HBA64B150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch HBA64B150 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch HBA64B150

Bosch HBA64B150 User Manual - German - 28 pages

Bosch HBA64B150 User Manual - Dutch - 28 pages

Bosch HBA64B150 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info