786204
23
Zoom out
Zoom in
Previous page
1/383
Next page
English | 23
(8) Standard auxiliary handle (insulated gripping sur-
face)
(9) Vibration-damping auxiliary handle (insulated grip-
ping surface)a)
(10) Protective guard for grinding
(11) Protective guard for cuttinga)
(12) X-LOCK grinding disc/flap disca)
(13) X-LOCK disc brusha)
(14) Cover for cutting
(15) X-LOCK cutting disca)
(16) X-LOCK diamond cutting disca)
(17) Handle (insulated gripping surface)
(18) X-LOCK holder
(19) Hand guarda)
(20) X-LOCK backing pad for fibre discsa)
(21) X-LOCK fibre disca)
(22) X-LOCK clip for fibre discsa)
(23) X-LOCK cup brusha)
(24) X-LOCK conical brusha)
(25) X-LOCK diamond core cuttera)
(26) Extraction guard for cutting with cutting guidesa)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Angle grinder GWX 18V-8
Article number 3601JJ70..
Rated voltage V= 18
Rated speedA) min-1 11,000
Max. grinding disc diameter/
rubber sanding pad diameter mm 125
Restart protection
Weight according to EPTA-Pro-
cedure01:2014B) kg 2.2–3.5
Recommended ambient tem-
perature during charging °C 0to+35
Permitted ambient temperature
during operationC) and during
storage
°C –20to+50
Recommended rechargeable
batteries GBA 18V...
ProCORE18V...
Angle grinder GWX 18V-8
Recommended chargers GAL 18...
GAX 18...
GAL 36...
A) Rated no-load speed for the selection of appropriate application
tools in accordance with ENIEC62841-2-3. The actual speed is
lower for safety reasons and according to production toler-
ances.
B) Depends on rechargeable battery(6), protective guard((11),
(10), (14)) and auxiliary handle((8), (9)) in use
C) Limited performance at temperatures <0°C
Noise/Vibration Information
Noise emission values determined according to
ENIEC62841-2-3.
Typically the A-weighted noise level of the power tool are: 90
dB(A); sound power level 98 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to ENIEC62841-2-3:
Surface grinding (roughing) and abrasive cutting:
ah=7.5 m/s2, K=1.5 m/s2,
Disc sanding:
ah=2.5 m/s2, K=1.5 m/s2.
Grinding thin metal sheets or other materials that tend to easily vi-
brate with a large surface area can cause the noise emission value to
increase by up to 15dB. Suitable, heavy damping mats can reduce
the increased noise emissions. Increased noise emissions must be
taken into consideration, both for the risk assessment of the noise
output and for selecting suitable hearing protection.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Restart protection
The restart protection feature prevents the power tool from
uncontrolled starting after the power supply to it has been
interrupted.
To restart the tool, set the on/off switch (5) to the off posi-
tion and then switch the power tool on again.
Bosch Power Tools 1 609 92A 76B | (16.02.2022)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWX 18V-8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWX 18V-8 in the language / languages: All languages as an attachment in your email.

The manual is 13.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info