786194
20
Zoom out
Zoom in
Previous page
1/345
Next page
20 | English
(11) X-LOCK cutting disca)
(12) Handle (insulated gripping surface)
(13) X-LOCK holder
(14) Hand guarda)
(15) X-LOCK backing pad for fibre discsa)
(16) X-LOCK fibre disca)
(17) X-LOCK clip for fibre discsa)
(18) X-LOCK cup brush/disc brusha)
(19) X-LOCK diamond annular cuttera)
(20) Extraction guard for cutting with cutting guidesa)
(21) X-LOCK diamond cutting disca)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Angle grinder GWX 18V-7 GWX 18V-7 GWX 18V-7
Article number 3601JH9101 3601JH9102 3601JH91B0
Rated voltage V= 18 18 18
Rated speedA) min-1 11,000 11,000 11,000
Max. grinding disc diameter mm 115 125 125
Restart protection
Run-out brake
Soft start
Weight according to EPTA-Procedure 01:2014B)
with low-vibration auxiliary
handle kg 2.4–3.1 2.4–3.2 2.4–3.2
with standard auxiliary handle kg 2.2–3.0 2.3–3.0 2.3–3.0
Recommended ambient temperat-
ure during charging °C 0to+35 0to+35 0to+35
Permitted ambient temperature dur-
ing operationC) and during storage °C –20to+50 –20to+50 –20to+50
Compatible rechargeable batteries GBA 18V...
ProCORE18V... GBA 18V...
ProCORE18V... GBA 18V...
ProCORE18V...
Recommended rechargeable batter-
ies GBA 18V...
ProCORE18V... ≤8.0Ah GBA 18V...
ProCORE18V... ≤8.0Ah GBA 18V...
ProCORE18V... ≤8.0Ah
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
A) Rated speed in accordance with EN 60745-2-3
B) Depends on battery in use
C) Limited performance at temperatures <0°C
Noise/Vibration Information
Noise emission values determined according to
EN60745-2-3.
Typically the A-weighted noise level of the power tool are: 87
dB(A); sound power level 98 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN60745-2-3:
Surface grinding (roughing):
ah=7.5m/s2, K=1.5m/s2,
Disc sanding:
ah<2.5m/s2, K=1.5m/s2.
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
1 609 92A 6KH | (15.07.2021) Bosch Power Tools
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWX 18V-7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWX 18V-7 in the language / languages: All languages as an attachment in your email.

The manual is 11.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info