786312

Bosch GWX 15-125 PS Manual

19
Zoom out
Zoom in
Previous page
1/301
Next page
English | 19
(11) X-LOCK fibre disc A)
(12) X-LOCK clip for fibre discs A)
(13) Protective guard for cutting A)
(14) X-LOCK cutting disc A)
(15) X-LOCK holder
(16) Hand guard A)
(17) X-LOCK cup brush/disc brush A)
(18) Diamond core bit A)
(19) Handle (insulated gripping surface)
(20) Extraction guard for cutting with a guide block A)
(21) Diamond cutting disc A)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder GWX 15-125 PS
Article number 3 601 GB9 0..
Rated power input W 1500
Power output W 820
Rated speed min-1 11,500
Speed adjustment range min-1 2800–11,500
Max. grinding disc diameter mm 125
Speed preselection ●
Restart protection ●
Constant electronic control ●
Starting current limitation ●
Kickback stop ●
Weight according to EPTA-
Procedure 01:2014
– with additional low-vibra-
tion auxiliary handle kg 2.5
– with standard auxiliary
handle kg 2.4
Protection class / II
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN60745-2-3.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 91 dB(A); sound power level 102
dB(A). Uncertainty K=3 dB.
Wear hearing protection
Total vibration values ah (triax vector sum) and uncertainty K
determined according to EN60745-2-3:
Surface grinding (roughing):
ah=5.0 m/s2, K=1.5 m/s2,
Grinding with abrasive disc:
ah= m/s2, K=1.5 m/s2.
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Fitting protective equipment
uPull the plug out of the socket before carrying out any
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-sales service and advice on
using products" section for addresses.
Protective guard for grinding
Place the protective guard
(8) onto the holder on the
power tool until the coding
cams of the protective
guard are aligned with the
holder. When doing so,
press and hold the unlock-
ing lever (1).
Press the protective guard
(8) onto the spindle collar
until the shoulder of the
protective guard is sitting
on the flange of the power
tool and rotate the protect-
ive guard until it audibly
clicks into place.
Adjust the position of the protective guard (8) to meet the
requirements of the operation. To do this, push the unlock-
ing lever (1) upward and rotate the protective guard (8) into
the required position.
uAlways position the protective guard (8) such that all
three red cams on the unlocking lever (1) engage in
Bosch Power Tools 1 609 92A 4F9 | (10.01.2019)
3.0
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWX 15-125 PS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWX 15-125 PS in the language / languages: All languages as an attachment in your email.

The manual is 10.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info