786304
21
Zoom out
Zoom in
Previous page
1/347
Next page
English | 21
uRemove the application tools before transporting the
power tool. This will allow you to avoid damage.
uBonded cutting and grinding discs have an expiration
date, after which the discs must no longer be used.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting and brushing metal,
stone, plastic and composite materials, roughing metal,
plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used(see "Operation", page25).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Lever
(4) On/off switch
(5) Standard auxiliary handle (insulated gripping sur-
face)
(6) Low-vibration auxiliary handle (insulated gripping
surface)a)
(7) Protective guard for grinding
(8) Protective guard for cuttinga)
(9) X-LOCK grinding disc/flap disca)
(10) X-LOCK disc brusha)
(11) Cover for cutting
(12) X-LOCK cutting disca)
(13) X-LOCK diamond cutting disca)
(14) Handle (insulated gripping surface)
(15) X-LOCK holder
(16) Hand guarda)
(17) X-LOCK backing pad for fibre discsa)
(18) X-LOCK fibre disca)
(19) X-LOCK clip for fibre discsa)
(20) X-LOCK cup brusha)
(21) X-LOCK conical brusha)
(22) X-LOCK diamond core cuttera)
(23) Extraction guard for cutting with cutting guidesa)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder GWX 10-125 GWX 14-125
Article number 3601GB30.. 3601GB70..
Rated power input W 1000 1400
Power output W 630 820
Rated speedA) min-1 11,000 11,000
Max. grinding disc diameter/rubber sanding
pad diameter mm 125 125
Restart protection
Soft start
Constant electronic control
Weight according to EPTA-Proced-
ure01:2014B) kg 2.2–2.5 2.2–2.5
Bosch Power Tools 1 609 92A 765 | (17.03.2022)
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWX 10-125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWX 10-125 in the language / languages: All languages as an attachment in your email.

The manual is 25.6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info