Manual Bosch gws 25 180 j sds (page 15 of 122) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

390503

Zoom out

Zoom in

1/122

English - 2

1 609 929 B76 • TMS • 30.11.00

Working safely with this ma-

chine is possible only when the

operating and safety information

are read completely and the in-

structions contained therein are

strictly followed. In addition, the

general safety instructions in the

enclosed booklet must be fol-

lowed. Before using for the first

time, ask for a practical demon-

stration.

If the mains cable is damaged or

cut through while working, do not

touch the cable but immediately

pull the mains plug. Never use the

machine with a damaged cable.

Wear protective glasses and ear

protection.

The dust that is produced while

working can be detrimental to

health, inflammable or explosive.

Suitable safety measures are re-

quired.

Examples: Some dusts are re-

garded as carcinogenic. Use suita-

ble dust-/chip extraction and wear a

dust mask.

Dust from light alloys can burn or

explode. Always keep the work

place clean, as blends of materials

are particularly dangerous.

Wear protective gloves and sturdy

shoes.

When necessary, also wear an

apron.

■ Never allow children to use the machine.

■ When working with the machine, always hold it

firmly with both hands and provide for a secure

stance.

■ Always direct the cable to the rear away from

the machine.

■ Connect machines that are used in the open

via a residual current device (RCD) with an ac-

tuating current of 30 mA maximum. Use only

extension cables that are approved for outdoor

use.

■ Always switch off the machine and allow to

come to a stop before placing it down.

■ Insert the mains plug only when the machine is

switched off.

■ For mains failure or when the main plug is

pulled, unlock the On/Off switch immediately

and turn it to the off position. This prevents un-

controlled restarting.

■ The machine must be used only for dry cut-

ting/grinding.

■ For all work with the machine, the auxiliary

handle 4 must be mounted.

■ For work with roughing or cutting discs, the

protective guard 5 must be mounted. For work

with the rubber sanding plate 19 or with the

cup brush 22/disc brush/flap disc, mounting

the hand protector 17 (optional extra) is rec-

ommended.

■ Use a vacuum cleaner for drawing off the dust

when working with stone and wear a dust

mask. The vacuum cleaner must be approved

for masonry dust. When cutting stone, use the

cutting guide.

■ Do not work with materials containing asbes-

tos.

■ Use only grinding tools with a permissible

speed at least as high as the no-load speed of

the machine.

■ Check grinding tools before use. The grinding

tool must be properly mounted and turn freely.

Perform a test run for at least 30 seconds with-

out load. Do not use damaged, out-of-round or

vibrating grinding tools.

■ Protect the grinding tool from impact, shock

and grease.

■ Apply the machine to the workpiece only when

switched on.

■ Keep hands away from rotating grinding tools.

■ Pay attention to the direction of rotation. Al-

ways hold the machine so that sparks and

grinding dust fly away from the body.

For Your Safety

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gws 25 180 j sds in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gws 25 180 j sds Manual

Product: