786341

Bosch GWS 24-230 PZ Manual

21
Zoom out
Zoom in
Previous page
1/325
Next page
English | 21
GWS 24-180 GWS 24-230 GWS 24-180 P GWS 24-230 P
K m/s21.5 1.5 1.5 1.5
Disc sanding:
ah
K
m/s2
m/s2
< 2.5
1.5
< 2.5
1.5
< 2.5
1.5
< 2.5
1.5
GWS 24-180 JZ GWS 24-230 JZ GWS 24-230 PZ
3601HC23.. 3601HC33.. 3601HC34..
Noise emission values determined according toEN60745-2-3.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
UncertaintyK
Wear hearing protection!
dB(A)
dB(A)
dB
94
105
3
94
105
3
94
105
3
Vibration total values ah (triax vector sum) and uncertaintyK determined according toEN60745-2-3:
Surface grinding:
ah
K
m/s2
m/s2
6.5
1.5
6.5
1.5
6.5
1.5
Disc sanding:
ah
K
m/s2
m/s2
3.0
1.5
3.0
1.5
3.0
1.5
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Fitting
Fitting Protective Equipment
uPull the plug out of the socket before carrying out any
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-Sales Service and Applica-
tion Service" section for addresses.
Protective guard for grinding
Place the protective guard (6) on the spindle collar. Adjust
the position of the protective guard (6) to the requirements
of the operation and lock the protective guard (6) with the
locking screw (7).
uAdjust the protective guard (6) such that sparking in
the direction of the operator is prevented.
Protective guard for cutting
uAlways use the protective guard for cutting (14) when
cutting with bonded abrasives.
uProvide sufficient dust extraction when cutting stone.
The protective guard for cutting (14) is fitted in the same
way as the protective guard for grinding (6).
Extraction guard for cutting with a guide block
The extraction guard for cutting with a guide block (22) is fit-
ted in the same way as the protective guard for grinding (6).
Side handle
uDo not operate your power tool without the side
handle (4).
Screw the side handle (4) on the left or right of the machine
head depending on how your are working.
Bosch Power Tools 1 609 92A 5TE | (29.07.2021)
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 24-230 PZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 24-230 PZ in the language / languages: All languages as an attachment in your email.

The manual is 5.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info