79055
15
Zoom out
Zoom in
Previous page
1/135
Next page
English - 1
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Thread for auxiliary handle (3x)
2 Spindle lock button
3 On/Off switch
4 Auxiliary handle
5 Mounting flange
6 Grinder spindle
7 Protection guard
8 Adjustment screw
9 Clamping lever
10 Grinding/cutting disc*
11 quick-clamping nut*
12 Clamping screw
13 Coded projection
14 Guard, grinding cup*
15 Grinding cup*
16 Clamping nut*
17 Two-pin spanner for clamping nut*
18 Hand guard*
19 Rubber sanding plate*
20 Sanding sheet*
21 Round nut*
22 Cup brush*
23 Diamond cutting disc*
24 Cutting guide with dust extraction
protection guard*
25 Handle unlocking button
26 Handle
27 Cutting grinder stand*
* Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the ma-
chine are: Sound pressure level: 93 dB (A);
sound power level: 106 dB (A).
Wear hearing protection!
When using the standard auxiliary handle, the
typically weighted maximum acceleration is
5.2 m/s
2
.
When using the vibration-dampening auxiliary
handle, the hand-arm vibration at the auxiliary
handle is typically below 2.5 m/s
2
.
Tool Specifications
Angle Grinder GWS ...
PROFESSIONAL
24-180 JBX 24-180 BX 24-230 JBX 24-230 BX
Article number 0 601 863 8.. 0 601 863 1.. 0 601 864 8.. 0 601 864 1..
Rated power input [W] 2 400 2 400 2 400 2 400
Output power [W] 1 600 1 600 1 600 1 600
No-load speed [rpm] 8 500 8 500 6 500 6 500
Grinding disc dia., max. [mm] 180 180 230 230
Reduced starting current
Grinder spindle thread M 14 M 14 M 14 M 14
Weight according to EPTA-
Procedure 01/2003
[kg] 5.3 5.3 5.3 5.3
Protection class / II / II / II / II
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltages and models for specific countries, these
values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Machine Elements
Noise/Vibration Information
1 609 929 H82.book Seite 1 Dienstag, 3. Mai 2005 3:11 15
16 1 609 929 H82 TMS 28.04.05
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 24-230 JBX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 24-230 JBX in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info