391256
29
Zoom out
Zoom in
Previous page
1/370
Next page
30 | English
1 609 929 L56 | (4.6.08) Bosch Power Tools
Rotating the Main Handle
(GWS 24-180 LVI/GWS 24-230 LVI)
f Before any work on the machine itself, pull
the mains plug.
The main handle 24 can be rotated with respect
to the machine housing toward the left or right
in steps of 90°. In this manner, the On/Off
switch can be brought into a more convenient
position for special working situations, e.g., for
cutting operations using the cutting guide with
dust extraction protection guard 21/cut off
stand or for left-handed persons.
Press the handle unlocking button 25 in the di-
rection of the arrow and at the same time turn
the main handle 24 to the requested position
until it latches.
Dust/Chip Extraction
f Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one’s health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in
connection with wood-treatment additives
(chromate, wood preservative). Materials
containing asbestos may only be worked by
specialists.
Use dust extraction whenever possible.
Provide for good ventilation of the work-
ing place.
It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
Operation
Starting Operation
f Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
When operating the machine with power from
mobile generators that do not have sufficient re-
serve capacity or are not equipped with suitable
voltage control with starting current amplifica-
tion, loss of performance or untypical behavior
can occur upon switching on.
Please observe the suitability of the power gen-
erator being used, particularly with regard to
the mains voltage and frequency.
Switching On and Off
To start the power tool, press the On/Off switch
3 forward and then down.
To lock-on the pressed On/Off switch 3, push
the On/Off switch 3 further forward.
max.
[mm]
[mm]
D b d [rpm] [m/s]
180
230
8
8
22.2
22.2
8500
6500
80
80
180
230
––
8500
6500
80
80
100 30 M 14 8500 45
b
d
D
D
D
b
d
25
24
OBJ_BUCH-429-005.book Page 30 Wednesday, June 4, 2008 11:55 AM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch gws 24 180 lvi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gws 24 180 lvi in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info