708216
19
Zoom out
Zoom in
Previous page
1/301
Next page
English | 19
(15)
Hand guard
A)
(16)
Spacer discs
A)
(17)
Rubber sanding pad
A)
(18)
Abrasive disc
A)
(19)
Round nut
A)
(20)
Cup brush
A)
(21)
Extraction guard for cutting with a guide block
A)
(22)
Diamond cutting disc
A)
(23)
Handle (insulated gripping surface)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder GWS22-180 H GWS22-180 JH GWS22-230 H GWS22-230 JH
Article number
3 601 H81 L.. 3 601 H81 M.. 3 601 H82 L.. 3 601 H82 M..
Rated power input W 2200 2200 2200 2200
Power output W 1500 1500 1500 1500
Rated speed min
-1
8500 8500 6500 6500
Max. grinding disc diameter mm 180 180 230 230
Grinding spindle thread M 14 M 14 M 14 M 14
Max. thread length of grinding spindle mm 25 25 25 25
Restart protection
Starting current limitation
Weight according to EPTA-Procedure 01:2014
with additional low-vibration auxili-
ary handle
kg 5.1 5.1 5.3 5.3
with standard auxiliary handle kg 5.0 5.0 5.2 5.2
Protection class
/ II / II / II / II
Angle grinder GWS24-180
JH
GWS24-230
H
GWS24-230
JH
GWS26-180
JH
GWS26-230
JH
Article number
3 601 H83
M..
3 601 H84
L..
3 601 H84
M..
3 601 H55
M..
3 601 H56
M..
Rated power input W 2400 2400 2400 2600 2600
Power output W 1600 1600 1600 1700 1700
Rated speed min
-1
8500 6500 6500 8500 6500
Max. grinding disc diameter mm 180 230 230 180 230
Grinding spindle thread M 14 M 14 M 14 M 14 M 14
Max. thread length of grinding spindle mm 25 25 25 25 25
Restart protection
Starting current limitation
Weight according to EPTA-Procedure 01:2014
with additional low-vibration auxiliary
handle
kg 5.1 5.2 5.3 6.0 6.1
with standard auxiliary handle kg 5.0 5.1 5.2 5.9 6.0
Protection class
/ II / II / II / II / II
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
When switching on power tools with starting current limitation, the voltage drops briefly. Interference with other equipment may occur in the
event of unfavourable conditions in the electricity supply. Malfunctions are not expected if the impedances in the electricity supply are below
0.25 ohms.
Noise/Vibration Information
Noise emission values determined according to
EN60745-2-3.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
104dB(A). Uncertainty K=3 dB.
Bosch Power Tools 1 609 92A 433 | (08.05.2019)
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 24-180 JH Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 24-180 JH Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info