Manual Bosch GWS 21-230 JHV (page 18 of 261) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

106070

Zoom out

Zoom in

1/261

English - 5

An O-ring (plastic

part) is inserted in

the mounting

flange 9 around the

spigot.

If the O-ring is missing or is damaged, it must

in all cases be replaced (Order No.

1 600 210 039) before the mounting flange 9 is

mounted.

☞

After mounting the grinding tool and be-

fore switching on, check that the grind-

ing tool is correctly mounted and that it

can turn freely.

Flap Disc

Depending on the application, remove the protec-

tion guard 6 and mount the hand guard 18. Place

the special mounting flange 9 (accessory, Order

No. 2 605 703 028) and the flap disc on the

grinder spindle 5. Screw on the clamping nut 11

and tighten with the two-pin spanner.

Rubber Sanding Plate 20

Depending on the application, remove the protec-

tion guard 6 and mount the hand guard 18.

Before mounting the rubber sanding pad 20,

place the 2 spacers 19 onto the grinding spindle.

For mounting, see the illustration page.

Screw on the round nut 22 and tighten with the

two-pin spanner.

Cup Brush 23/Disc Brush

Depending on the application, remove the protec-

tion guard 6 and mount the hand guard 18.

The grinding tool must be able to be screwed

onto the grinding spindle 5 until it rests firmly

against the grinder spindle flange at the end of

the grinder spindle threads. Tighten with an

open-end spanner.

Grinding Cup

When working with grinding cups, use

the special guard 15.

The grinding cup 16 should always protrude

from the guard 15 only as far as absolutely nec-

essary for the work to be performed in each case.

Adjust the guard 15 to this distance.

For mounting, see the illustration page.

Screw on the clamping nut 11 and tighten with

the fitting offset two-pin spanner 17.

Instead of the clamping nut 11, the quick-clamp-

ing nut 12 (accessory) can be used. Grinding

tools can then be mounted without using tools.

The quick-clamping nut 12 may be used only

for grinding and cutting discs.

Use only a flawless, undamaged quick-clamp-

ing nut 12.

When screwing on, take care that the side with

printing does not point to the grinding disc. The

arrow must point to the index mark 29.

Lock the grinder

spindle with the spin-

dle lock button 2.

Tighten the quick-

clamping nut by

forcefully turning the

grinding disc in the

clockwise direction.

A properly tightened

undamaged, quick-

clamping nut can be

loosened by hand

turning the knurled

ring in anticlockwise

direction.

Never loosen a tight

quick-clamping nut

with pliers but use a

two-pin spanner. In-

sert the two-pin

spanner as shown in

the illustration.

Quick Clamping Nut

1 609 929 R35.book Seite 5 Mittwoch, 13. Februar 2008 1:16 13

19 • 1 609 929 R35 • 03.11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 21-230 JHV in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GWS 21-230 JHV

Bosch GWS 21-230 JHV User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 119 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 21-230 JHV Manual

Product: