473694
18
Zoom out
Zoom in
Previous page
1/122
Next page
English - 5
1 609 929 B76 • TMS • 30.11.00
Instead of the clamp-
ing nut 11, the quick
clamping nut 12 (op-
tional extra) can be
used. Grinding tools
can be mounted with-
out using tools.
The quick clamping
nut 12 may be used
only for roughing
and cutting discs.
Use only a flawless,
undamaged quick
clamping nut 12.
When screwing on,
take care that the
side with printing
does not point to the
grinding disc. The ar-
row must point to the
index mark 27.
Lock the grinder spindle with the spindle locking
button 2. Tighten the quick clamping nut by force-
fully turning the grinding disc in the clockwise di-
rection.
A properly tightened undamaged, quick clamping
nut can be loosened by hand turning the knurled
ring in the counter-clockwise direction.
Never loosen a tight quick clamping nut with
pliers but use a two-hole spanner. Insert the
two-hole spanner as shown in the illustration.
All grinding tools described in these operating in-
structions can be used (roughing and cutting
discs of synthetic resin-bonded, fibre-reinforced
material).
The permissible speed [RPM] or the circumferen-
tial speed [m/s] of the grinding tools used must be
at least in accordance with the values given in the
table.
Therefore, always observe the permissible rota-
tional/circumferential speed on the label of the
grinding tool.
Quick Clamping Nut
(Optional Extra)
2
27
12
2
Approved Grinding Tools
max.
[mm] [mm]
Dbd[RPM] [m/s]
180
230
8
8
22.2
22.2
8 500
6 500
80
80
180
230
8 500
6 500
80
80
100 30 M 14 8 500 45
b
d
D
D
D
b
d
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 2000 23J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 2000 23J in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info