473693
14
Zoom out
Zoom in
Previous page
1/122
Next page
English - 1
1 609 929 B76 • TMS • 30.11.00
1 Thread for auxiliary handle (3x)
2 Spindle lock
3 On/Off switch
4 Auxiliary handle
5 Protective guard
6 Grinder spindle
7 Adjustment screw
8 Clamping lever
9 Mounting flange with O-ring
10 Roughing/cutting disc*
11 Clamping nut
12 quick clamping nut*
13 Clamping screw
14 Coded projection
15 Guard, grinding cup*
16 Grinding cup*
17 Hand protector*
18 Spacers*
19 Rubber sanding plate*
20 Sanding sheet*
21 Round nut*
22 Cup brush*
23 Cutting guide with protective vacuuming
hood*
24 Diamond cutting disc*
25 Handle
26 Handle unlocking button
* Optional accessories
* Not all of the accessories illustrated or described are
included as standard delivery.
Tool Specifications
Angle Grinder GWS 180 GWS 230 GWS 20-180 GWS 20-230
Part number 0 601 751 0.. 0 601 752 0.. 0 601 751 0.. 0 601 752 0..
With residual current-limit control GWS 180 J GWS 230 J GWS 20-180 J GWS 20-230 J
Part number 0 601 751 9.. 0 601 752 9.. 0 601 751 9.. 0 601 752 9..
GWS 2000-18 J GWS 2000-23 J
0 601 751 9.. 0 601 752 9..
Rated power 1 900 W 1 900 W 2 000 W 2 000 W
Output power 1 175 W 1 175 W 1 250 W 1 250 W
No-load speed 8 500 RPM 6 500 RPM 8 500 RPM 6 500 RPM
Grinding disk dia. max. 180 mm max. 230 mm max. 180 mm max. 230 mm
Grinder spindle threads M 14 M 14 M 14 M 14
Weight
(without optional extras) approx. 4.2 kg 4.2 kg 4.2 kg 4.2 kg
Safety class / II / II / II / II
Angle Grinder GWS 23-180 GWS 23-230 GWS 25-180 GWS 25-230
Part number 0 601 753 0.. 0 601 754 0.. 0 601 755 0.. 0 601 756 0..
0 601 753 1.. 0 601 754 1.. 0 601 755 1.. 0 601 756 1..
With residual current-limit control GWS 23-180 J GWS 23-230 J GWS 25-180 J GWS 25-230 J
Part number 0 601 753 9.. 0 601 754 9.. 0 601 755 9.. 0 601 756 9..
0 601 753 8.. 0 601 754 8.. 0 601 755 8.. 0 601 756 8..
Rated power 2 300 W 2 300 W 2 500 W 2 500 W
Output power 1 600 W 1 600 W 1 750 W 1 750 W
No-load speed 8 500 RPM 6 500 RPM 8 500 RPM 6 500 RPM
Grinding disk dia. max. 180 mm max. 230 mm max. 180 mm max. 230 mm
Grinder spindle threads M 14 M 14 M 14 M 14
Weight
(without optional extras) approx. 4.9 kg 4.9 kg 5.1 kg 5.1 kg
Safety class / II / II / II / II
Please observe the order numbers of the machine. The trade names of the individual machines may vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be
affected. If the system impedance of the power supply is lower than 0.25 Ohm, disturbances are unlikely to occur.
Machine Elements
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 2000 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 2000 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info