786327

Bosch GWS 18-125 SPL Manual

19
Zoom out
Zoom in
Previous page
1/364
Next page
20 | English
1 609 92A 3ZX | (7.11.17) Bosch Power Tools
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, un-
fold the graphics page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1Release lever for protection guard
2Spindle lock button
3Thumbwheel for speed preselection
(GWS 18-125 SL/GWS 18-125 SPL)
4On/Off switch
5Auxiliary handle (insulated gripping surface)
6Grinder spindle
7Extraction hood for sanding*
8Mounting flange with O-ring
9Carbide grinding head*
10 Clamping nut
11 Quick-clamping nut *
12 Protection guard for grinding
13 Grinding wheel*
14 Protection guard for cutting*
15 Cutting disc*
16 Hand guard*
17 Rubber sanding plate*
18 Sanding sheet*
19 Round nut*
20 Cup brush*
21 Cutting guide with dust extraction protection guard *
22 Diamond cutting disc*
23 Handle (insulated gripping surface)
24 Direction-of-rotation arrow for grinding spindle
25 Diamond core cutter*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Angle Grinder GWS ... 18-125 L 18-125 PL 18-125 SL 18-125 SPL
Article number 3 601 ... GA3 0.. GA3 1.. GA3 2.. GA3 3..
Rated power input W 1800 1800 1800 1800
Output power W 1145 1145 1145 1145
Rated speed min-1 12000 12000 12000 12000
Speed control adjustment min-1 –– 2800 – 12000 2800–12000
Grinding disc diameter, max. mm 125 125 125 125
Thread of grinder spindle M 14 M 14 M 14 M 14
Thread length (max.) of grinder spindle mm 22 22 22 22
Kickback stop 
Restarting Protection 
Reduced starting current 
Constant electronic control 
Speed preselection – –
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-3330-001.book Page 20 Tuesday, November 7, 2017 2:23 PM
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GWS 18-125 SPL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 18-125 SPL in the language / languages: All languages as an attachment in your email.

The manual is 26.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info