Manual Bosch GWS 15-125 CITH (page 18 of 156) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79075

Zoom out

Zoom in

1/156

English | 191 609 929 L08 • 12.1.07

d) Store idle power tools out of the reach of

children and do not allow persons unfa-

miliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalign-

ment or binding of moving parts, break-

age of parts and any other condition that

may affect the power tool’s operation. If

damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazardous

situation.

5) Service

a) Have your power tool serviced by a quali-

fied repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Machine-specific

Safety Warnings

Safety warnings that are common for

grinding, sanding, wire brushing or

abrasive cutting off operations

f This power tool is intended to function as a

grinder, sander, wire brush or cut-off tool.

Read all safety warnings, instructions, illus-

trations and specifications provided with

this power tool. Failure to follow all instructions

listed below may result in electric shock, fire

and/or serious injury.

f This power tool is not recommended for

poslishing. Operations for which the power tool

was not designed may create a hazard and cause

personal injury.

f Do not use accessories which are not specif-

ically designed and recommended by the

tool manufacturer. Just because the accessory

can be attached to your power tool, it does not

assure safe operation.

f The rated speed of the accessory must be at

least equal to the maximum speed marked

on the power tool. Accessories running faster

than their rated speed can fly apart.

f The outside diameter and the thickness of

your accessory must be within the capacity

rating of your power tool. Incorrectly sized

accessories cannot be adequately guarded or

controlled.

f The arbor size of wheels, flanges, backing

pads or any other accessory must properly fit

the spindle of the power tool. Accessories with

arbor holes that do not match the mounting hard-

ware of the power tool will run out of balance,

vibrate excessively and may cause loss of control.

f Do not use a damaged accessory. Before

each use, inspect the accessory such as

abrasive wheels for chips and cracks, back-

ing pads for cracks, tears or excess wear,

wire brushes for loose or cracked wires. If

power tool or accessory is dropped, inspect

for damage or install an undamaged acces-

sory. After inspecting and installing an

accessory, position yourself and bystanders

away from the plane of the rotating acces-

sory and run the power tool at maximum

no-load speed for one minute. Damaged

accessories will normally break apart during this

test time.

f Wear personal protective equipment.

Depending on application, use face shield,

safety goggles or safety glasses. As appro-

priate, wear dust mask, hearing protectors,

gloves and shop apron capable of stopping

small abrasive or workpiece fragments. The

eye protection must be capable of stopping flying

debris generated by various operations. The dust

mask or respirator must be capable of filtrating

particles generated by your operation. Prolonged

exposure to high intensity noise may cause hearing

loss.

f Keep bystanders a safe distance away from

the work area. Anyone entering the work

area must wear personal protective equip-

ment. Fragments of workpiece or of a broken

accessory may fly away and cause injury beyond

immediate area of operation.

f Hold the power tool only by the insulated

gripping surfaces when performing an oper-

ation where the cutting tool may contact hid-

den wiring or its own power cord. Contact with

a “live” wire will also make exposed metal parts of

the power tool “live” and shock the operator.

f Position the cord clear of the spinning acces-

sory. If you lose control of the power tool, the cord

may be cut or snagged and your hand or arm may

be pulled into the spinning accessory.

OBJ_BUCH-165-003.book Page 19 Friday, January 12, 2007 9:16 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 15-125 CITH in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GWS 15-125 CITH

Bosch GWS 15-125 CITH User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish - 156 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 15-125 CITH Manual

Product: