Manual Bosch GWS 14-150 CI (page 31 of 199) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

105995

Zoom out

Zoom in

1/199

32 | English

1 609 929 L00 | (25.7.08) Bosch Power Tools

Flap Disc

f For operations with the flap disc, always

mount the hand guard 15.

Rubber Sanding Plate

f For operations with the rubber sanding

plate 16, always mount the hand guard 15.

See graphics page for the mounting sequence.

Screw on the round nut 18 and tighten with the

two-pin spanner.

Cup Brush/Disc Brush

f For operations with the cup brush/wheel

brush, always mount the hand guard 15.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be

screwed onto the grinder spindle until it rests

firmly against the grinder spindle flange at the

end of the grinder spindle threads. Tighten the

cup brush/disc brush with an open-end span-

ner.

Quick-clamping Nut

For convenient changing of grinding tools with-

out the use of additional tools, you can use the

quick-clamping nut 11 instead of the clamping

nut 10.

f The quick-clamping nut 11 may be used only

for grinding or cutting discs.

Use only a flawless, undamaged quick-clamp-

ing nut 11.

When screwing on, pay attention that the side

of the quick-clamping nut 11 with printing

does not face the grinding disc; the arrow must

point to the index mark 22.

Lock the grinder spin-

dle with the spindle

lock button 2. To tight-

en the quick-clamping

nut, firmly turn the

grinding disc in clock-

wise direction.

A properly attached,

undamaged quick-

clamping nut can be

loosened by hand

when turning the

knurled ring in anti-

clockwise direction.

Never loosen a tight

quick-clamping nut

with pliers. Always

use the two-pin span-

ner. Insert the two-pin spanner as shown in the

illustration.

Approved Grinding Tools

All grinding tools mentioned in these operating

instructions can be used.

The permissible speed [min

-1

] or the circumfer-

ential speed [m/s] of the grinding tools used

must at least match the values given in the table.

Therefore, observe the permissible rotation-

al/circumferential speed on the label of the

grinding tool.

max.

[mm]

D b d [min

-1

] [m/s]

115

125

150

22.2

11000

9300

115

125

–

11000

75 30 M 14 11000 45

OBJ_BUCH-340-002.book Page 32 Friday, July 25, 2008 9:21 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GWS 14-150 CI in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GWS 14-150 CI

Bosch GWS 14-150 CI User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 199 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GWS 14-150 CI Manual

Product: