426991
9
Zoom out
Zoom in
Previous page
1/68
Next page
11
Euro • BA 3 609 929 301 • GUF 4-22 A • OSW 11/00 • GB
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety instructions in the
enclosed booklet must be fol-
lowed. Before using for the first
time, ask for a practical demon-
stration.
If the cable is damaged or cut
through while working, do not touch
the cable but immediately pull the
mains plug. Never use the machine
with a damaged cable.
Dust that is produced while working
is detrimental to health. Use dust
vacuuming.
Wear hearing protection.
Wear safety glasses.
Before each use of the machine, check the
cable and plug. If damage is detected, do not
use the machine. Have repairs performed only
by a qualified technician. Never open the ma-
chine yourself.
Before any work on the machine itself, pull the
mains plug.
The machine should be operated only with the
accessory devices and the auxiliary handle.
Always direct the cable to the rear away from
the machine.
Apply the machine to the workpiece only when
switched on.
Take care to advance uniformly (decreases
the danger of accidents and lengthens the ser-
vice life of the cutting disc and the machine).
Do not brake the cutting disc to a stop after
switching off by applying pressure to the side.
Use only sharp and flawless cutting discs.
Replace cracked or bent cutting discs immedi-
ately!
For safety reasons, only the cutting discs list-
ed in the operating instructions may be used.
Protect the cutting disc from shock and im-
pact!
All-Purpose Saw GUF 4-22 A
Order number 0 601 607 103
Rated power input 620 W
Power output 320 W
No-load speed 10 000 RPM
Cutting disc dia. 105 mm
Cutting disc hole dia. 20 mm
Corner distance 80 mm
Shadow gap width 12.5 mm min.
Groove depth 22 mm
Groove width 2.8/4 mm
Weight (without accessories) 2.4 kg
Protection class / II
1 Motor
2 Parallel guide
3 Cutting mark
4 Chip ejector
5 Knurled screw
6 Cutting depth scale
7 Course cutting depth adjustment
8 Scale
9 Wing nut
10 Angle guide
11 Screw
12 Lug
13 Adhesive rail
14 Auxiliary handle
15 Spindle lock button
16 Clamping lever
17 Handle
18 Allen key
19 On/Off switch
20 Thread for auxiliary handle
21 Adjusting screw
22 Adjusting dial
23 Allen screw
24 Wing nut
25 Drive spindle
26 Distance bush
27 Cutting disk
28 Clamping flange
29 Cover
Not all of the accessories illustrated or described are
included as standard delivery.
Tool Specifications
GB
For your safety
Operating controls
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch guf 4 22a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch guf 4 22a in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info