Manual Bosch GTL 3 Professional (page 17 of 277) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591995

Zoom out

Zoom in

1/277

English | 17

Bosch Power Tools 1 609 92A 0L0 | (16.5.14)

Assembly

Inserting/Replacing the Batteries

Alkali-manganese batteries are recommended for the

measuring tool.

To open the battery lid 6, press on the latch 7 and fold the

battery lid up. Insert the batteries. When inserting, pay

attention to the correct polarity according to the repre-

sentation on the inside of the battery compartment.

When the battery indication

flashes, the batteries are

weak. When the battery indication flashes for the first time,

the measuring tool can still be operated for approx.

When the battery indication 8 lights up constantly, meas-

uring is no longer possible. The measuring tool automati-

cally switches off after a short time.

Always replace all batteries at the same time. Only use

batteries from one brand and with the identical capacity.

 Remove the batteries from the measuring tool

when not using it for extended periods. When stor-

ing for extended periods, the batteries can corrode

and self-discharge.

Operation

Initial Operation

 Protect the measuring tool against moisture and

direct sun light.

 Do not subject the measuring tool to extreme tem-

peratures or variations in temperature. As an exam-

ple, do not leave it in vehicles for a long time. In case of

large variations in temperature, allow the measuring

tool to adjust to the ambient temperature before put-

ting it into operation. In case of extreme temperatures

or variations in temperature, the accuracy of the meas-

uring tool can be impaired.

 Avoid hard knocks to the measuring tool or drop-

ping it. Damaging the measuring tool can cause accu-

racy to be compromised. Following a hard knock or

fall, carry out a check by comparing the laser lines or

plumb beams with a known horizontal or vertical refer-

ence line or verified perpendicular points.

Switching On and Off

To switch on the measuring tool, press the On/Off button

3 once briefly. Immediately after the switching on, the

measuring tool projects the three laser lines 0°, 45° and

90° from the exit openings 1. Furthermore, the battery

indication 8 lights up for 3 s.

 Do not point the laser beam at persons or animals

and do not look into the laser beam yourself, not

even from a large distance.

When the On/Off button 3 is pressed a second time, the

measuring tool switches over from 3-line operation to

2-line operation: Only the 0° and the 90° laser lines are

projected.

To switch off the measuring tool, press the On/Off button

3 a third time.

Deactivating the Automatic Shut-off

The measuring tool switches off automatically after an

operating duration of 30 minutes.

To deactivate the automatic switch-off, press the On/Off

button 3 for 3 s when you switch on the measuring tool.

When the automatic switch-off is deactivated, the laser

lines flash briefly to confirm after the switching on.

 Do not leave the switched-on measuring tool unat-

tended and switch the measuring tool off after use.

Other persons could be blinded by the laser beam.

Dimensions

156x102x98mm

Degree of protection

IP 54 (dust and splash water protected)

Tile laser GTL 3

Professional

1) The working range can be decreased by unfavourable environmental conditions (e.g. direct sun irradiation).

2) The angular accuracy between the 45° laser line and the 90° laser line is max. ±0.4 mm/m.

The measuring tool can be clearly identified with the serial number 5 on the type plate.

OBJ_BUCH-828-004.book Page 17 Friday, May 16, 2014 1:02 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GTL 3 Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GTL 3 Professional Manual

Product: