786152
14
Zoom out
Zoom in
Previous page
1/195
Next page
14 | English
Battery model GBA 18V...
LEDs Capacity
3× continuous green light 60−100%
2× continuous green light 30−60%
1× continuous green light 5−30%
1× flashing green light 0−5%
Battery model ProCORE18V...
LEDs Capacity
5× continuous green light 80−100%
4× continuous green light 60−80%
3× continuous green light 40−60%
2× continuous green light 20−40%
1× continuous green light 5−20%
1× flashing green light 0−5%
Changing the Tool (seefigureA)
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Remove the depth stop(4) from the power tool. Pull the
screwdriver bit(1) out. If required, the universal bit
holder(14) can also be pulled out and replaced. Use a pair
of pliers if necessary.
After changing the tool, reattach the depth stop(4).
Operation
Starting Operation
Inserting the battery
Note: The use of batteries unsuitable for your power tool can
lead to malfunctions or damage to the power tool.
Set the rotational direction switch (5) to the middle position
to avoid unintentionally switching it on. Insert the charged
battery (7) into the handle until you feel it engage and it is
flush with the handle.
Setting the rotational direction (seefiguresE–F)
The rotational direction switch (5) is used to change the ro-
tational direction of the power tool. However, this is not pos-
sible while the on/off switch (12) is being pressed.
Clockwise: Slide the rotational direction switch (5) on
the left-hand side of the power tool towards the front
of the power tool. The rotational direction switch (5)
on the right-hand side of the power tool automatically
slides backwards.
Anticlockwise: Slide the rotational direction switch
(5) on the left-hand side of the power tool backwards
(i.e. away from the front of the power tool). The rota-
tional direction switch (5) on the right-hand side of the
power tool automatically slides forwards.
Switching on/off
To start the power tool, press and hold the on/off switch
(12).
The LED lights up when the on/off switch (12) is lightly or
fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
Press the lock-on button (6) to lock the on/off switch (12) in
this position.
To switch off the power tool, release the on/off switch (12);
or, if the switch is locked with the lock-on button (6), briefly
press the on/off switch (12) and then release it.
Adjusting the Speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch (12) to varying extents.
A light pressure on the on/off switch (12) results in a low ro-
tational speed. Increased pressure on the switch causes an
increase in speed.
Screwing in Screws
To screw in screws place the screw on the screwdriver bit
(1). The screw will be held in place by the magnetic reten-
tion force of the universal bit holder(14). Slide the rota-
tional direction switch(5) on the left-hand side of the power
tool towards the front of the power tool. Switch the power
tool on and push the tip of the screw firmly against the work-
piece. The screw is screwed into the workpiece until it
reaches the set screw-in depth. The reversible depth
stop(4) touches the workpiece and the drive is switched off;
the universal bit holder(14) stops turning. Check the screw-
in depth and readjust the reversible depth stop(4) if neces-
sary.
Adjusting the Screw-in Depth (seefigureB)
The depth to which the screw head is screwed into the work-
piece can be preset by turning the adjusting sleeve(3).
Turn the adjusting sleeve(3) to the position of
your required screw-in depth. The number on
the scale (visible on the edge of the adjusting
sleeve(3)) can be used as a guide for your re-
quired screw-in depth.
Turning the adjusting sleeve(3) clockwise in-
creases the screw-in depth; turning it anti-
clockwise decreases the screw-in depth. Turning the adjust-
ing sleeve(3) beyond the MAX position will remove it from
the stop sleeve(2) completely.
The best way to determine the setting you require is to drive
in some test screws.
1 609 92A 6HJ | (23.09.2021) Bosch Power Tools
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GTB 185-Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GTB 185-Li in the language / languages: All languages as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info