786483

Bosch GTA 3800 Manual

15
Zoom out
Zoom in
Previous page
1/125
Next page
English | 15
uEnsure that all screws and connecting pieces are
tightly fastened during transport and when carrying
out work. The holder sets for the power tool must al-
ways be securely locked. Loose connections can cause
instability and inaccurate sawing.
uOnly install and remove the power tool when it is in
the transport position (for information on the trans-
port position, also refer to the operating instructions
for the relevant power tool). Otherwise the power tool
may have an such unfavourable centre of gravity that you
will not be able to hold onto it securely.
uOperate the power tool fastened to the holder set only
on the saw stand. Without the saw stand, the holder set
with the power tool is not secure and can tilt.
uEnsure that long and heavy workpieces do not unbal-
ance the saw stand. The free end of long and heavy
workpieces must have something placed underneath it or
be supported.
uWhen pushing together or pulling apart the saw stand,
do not put your fingers near the points of articulation.
There is a risk of fingers being crushed.
Symbols
The following symbols may provide you with important in-
formation about the use of your saw stand. Please take note
of these symbols and their meaning. Knowing what these
symbols mean will help you to use your saw stand more ef-
fectively and more safely.
Symbols and their meaning
250
kg
The maximum load bearing capacity
(power tool + workpiece) of the saw
stand is250kg.
Product description and
specifications
Intended Use
The saw stand is intended for holding the following Bosch
benchtop saws (stand 2021.03):
– GCM 8 S (3 601 L16 0..)
– GCM 8 SJ (3 601 L16 2..)
– GCM 800 S (3 601 L16 1..)
– GCM 80 SJ (3 601 M19 0..)
– GCM 800 SJ (3 601 M19 0..)
– GCM 8000 SJ (3 601 M19 0..)
– GCM 8 SJL (3 601 M19 1..)
– GCM 8 SDE (3 601 M19 2..)
– GCM 10 J (3 601 M20 2..)
– GCM 10 S (0 601 B20 5..)
– GCM 10 SD (0 601 B22 5..)
– GCM 10 GDJ (3 601 M27 0..)
– GCM 10 X (3 601 M15 0..)
– GCM 10 MX (3 601 M29 0..)
– GCM 12 SE (0 601 B23 5..)
– GCM 12 JL (3 601 M21 1..)
– GCM 12 MX (3 601 M21 1..)
– GCM 12 SDE (3 601 M23 1..)
– GCM 12 GDL (3 601 M23 6..)
– GCM 216 (3 601 M33 0..)
– GCM 350-254 (3 601 M22 6..)
– GCM 18V-216 (3 601 M41 0..)
– GCM 18V-305 GDC (3 601 M43 0..)
– GTM 12 (3 601 M15 0..)
– GTM 12 JL (3 601 M15 0..)
Selected mitre saws from other manufacturers can likewise
be installed.
The saw stand and power tool are intended for cutting
boards and profiles.
Product Features
The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
(1) Workpiece support
(2) Table extension
(3) Table extension locking knob
(4) Holder set
(5) Locking knob for roller support height adjustment
(6) Workpiece support locking knob
(7) Roller support
(8) Length stop
(9) Height-adjustable foot
(10) Carrying handle
(11) Transport stopa)
(12) Transport wheelsa)
(13) Height-adjustable support leg of the table exten-
siona)
(14) Socket spanner (13mm)/hex key (4mm)/cross-
headed screwdriver
(15) Locking pin
(16) Release button
(17) Holder set locking lever
(18) Movable nut
(19) Power tool fastening set
(20) Transport wheels fastening seta)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Saw stand GTA 3800
Article number 3 601 M24 001
Bosch Power Tools 1 609 92A 6JA | (06.09.2021)
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GTA 3800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GTA 3800 in the language / languages: All languages as an attachment in your email.

The manual is 4.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info