Manual Bosch GSS 280 AE (page 18 of 254) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

79004

Zoom out

Zoom in

1/254

18 | English

2 609 932 790 | (6.12.10) Bosch Power Tools

different accessories or poorly maintained, the

vibration emission may differ. This may signifi-

cantly increase the exposure level over the total

working period.

An estimation of the level of exposure to vibra-

tion should also take into account the times

when the tool is switched off or when it is run-

ning but not actually doing the job. This may sig-

nificantly reduce the exposure level over the to-

tal working period.

Identify additional safety measures to protect

the operator from the effects of vibration such

as: maintain the tool and the accessories, keep

the hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that

the product described under “Technical Data” is

in conformity with the following standards or

standardization documents: EN 60745 accord-

ing to the provisions of the directives

2004/108/EC, 2006/42/EC.

Technical file at:

Robert Bosch GmbH, PT/ESC,

D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

09.11.2010

Assembly

f Before any work on the machine itself, pull

the mains plug.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– As far as possible, use a dust extraction

system suitable for the material.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

f Prevent dust accumulation at the work-

place. Dusts can easily ignite.

Integrated Dust Extraction with Dust Box

(see Fig. A1 – A4)

Before assembling the dust box 6, pull out the

plastic slider 13. Place the dust box 6 onto the

extraction outlet 14 and allow it to engage.

Make sure that the plastic slider 13 engages in

the holder 12.

To empty the dust box 6, press the latching

levers 15 on the side of the dust box (n). Pull

off the dust box toward the bottom (o).

Before opening the dust box 6, it is recommend-

ed to loosen the dust from the filter element by

gently striking it against a firm support (as

shown in the figure).

Grasp the dust box 6 by the recessed grip, fold

the filter element 16 upward and empty the dust

box. Clean the thin plates of the filter element

16 with a soft brush.

External Dust Extraction (see figure B)

Slide the extraction adapter 17 onto the outlet

piece 14. Ensure that the latching levers of the

extraction adapter engage. The extraction

adapter 17 accepts a vacuum hose with a diam-

eter of 19 mm.

For removal of the extraction adapter 17, press

the latching levers together at the rear and pull

the extraction adapter off.

The vacuum cleaner must be suitable for the ma-

terial being worked.

Dr. Egbert Schneider

Senior Vice President

Engineering

Dr. Eckerhard Strötgen

Head of Product

Certification

OBJ_BUCH-426-004.book Page 18 Monday, December 6, 2010 8:24 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSS 280 AE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSS 280 AE Manual

Product: