Manual Bosch GSS 23 AE Professional (page 18 of 97) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian)

592633

Zoom out

Zoom in

1/97

1 609 929 N27 | (11.12.07) Bosch Power Tools

18 | English

The vacuum cleaner must be suitable for the ma-

terial being worked.

When vacuuming dry dust that is especially detri-

mental to health or carcinogenic, use a special

vacuum cleaner.

Replacing the Sanding Sheet

When attaching a new sanding sheet, remove any

dust or debris from the sanding plate 6 (e. g. with

a brush).

To ensure optimum dust extraction, pay atten-

tion that the punched holes in the sanding sheet

match with the holes in the sanding plate.

Sanding Sheets with Velcro Backing

(see figure A)

The sanding plate 6 is fitted with Velcro backing

for quick and easy fastening of sanding sheets

with Velcro adhesion.

Before attaching the sanding sheet 7, free the

Velcro backing of the sanding plate 6 from any

debris by tapping against it in order to enable op-

timum adhesion.

Position the sanding sheet 7 flush alongside one

edge of the sanding plate 6, then lay the sanding

sheet onto the sanding plate and press it against

it with a light turning motion in clockwise direc-

tion.

To remove the sanding sheet 7, grasp it at one of

the tips and pull it off from the sanding plate 6.

Sanding Sheets without Velcro Backing

(see figures B–D)

n Press the release button 8 and keep it de-

pressed.

o Guide the sanding sheet 7 to the stop under

the opened front clamping bracket 9 and let

go of the release button 8 again. Pay atten-

tion that the sanding sheet is clamped cen-

trally.

p Press the sanding sheet clamp 5 inward and

pivot it to the stop.

q Fold the sanding sheet 7 firmly around the

sanding plate. Guide the other end of the

sanding sheet 7 between the rear clamping

bracket and the red roller on the clamping

bracket 5.

r Hold the sanding sheet tensely and press the

clamping bracket 5 toward the sanding plate

to lock the sanding sheet.

Sanding sheets without holes, e. g. from rolls or

by the meter, can be punctured with the perfo-

rating tool 10 for use with dust extraction. For

this, press the machine with the mounted sand-

ing sheet onto the perforating tool (see figure E).

To remove the sanding sheet 7, loosen the

clamping bracket 5 and pull out the sanding

sheet from the rear holding fixture. Press the re-

lease button 8 and completely remove the sand-

ing sheet.

Selecting the Sanding Sheet

Depending on the material to be worked and the

required rate of material removal, different sand-

ing sheets are available:

Grain size

For the working of

all wooden materials

40—240

For coarse-sanding,

e. g. of rough, un-

planed beams and

boards coarse 40, 60

For face sanding and

planing small irregu-

larities medium 80, 100, 120

For finish and fine

sanding of hard

woods fine 180, 240

For the working of

paint/enamel coats

or primers and fillers

—320

For sanding off paint coarse 40, 60

For sanding primer medium 80, 100, 120

For final sanding of

primers before coat-

ing fine 180, 240, 320

OBJ_BUCH-80-002.book Page 18 Tuesday, December 11, 2007 8:02 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSS 23 AE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Spanish, Norwegian as an attachment in your email.

The manual is 5,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bosch GSS 23 AE Professional

Bosch GSS 23 AE Professional User Manual - Polish - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSS 23 AE Professional Manual

Product: