592632
17
Zoom out
Zoom in
Previous page
1/189
Next page
English | 17
Bosch Power Tools 2 609 140 479 | (22.1.08)
Sanding Sheets without Velcro Backing
(see figures CE)
n Press the release button 8 and keep it de-
pressed.
o Guide the sanding sheet 7 to the stop under
the opened front clamping bracket 9 and let
go of the release button 8 again. Pay atten-
tion that the sanding sheet is clamped cen-
trally.
p Press the release lever 5 and keep it de-
pressed.
q Place the sanding sheet 7 firmly around the
sanding plate. Guide the other end of the
sanding sheet 7 under the opened rear
clamping bracket 4.
r Hold the sanding sheet and let go of the re-
lease lever 5 to lock the sanding sheet.
Sanding sheets without holes, e. g. from rolls or
by the meter, can be punctured with the perfo-
rating tool 13. For this, push the power tool with
the sanding sheet mounted onto the perforating
tool (see figure F).
To remove the sanding sheet 7, press the re-
lease lever 5 and pull the sanding sheet out of
the rear clamping bracket. Push the release but-
ton 8 and remove the sanding sheet completely.
Selecting the Sanding Sheet
Depending on the material to be worked and the
required rate of material removal, different
sanding sheets are available:
Replacing the Sanding Plate
(see figure G)
The sanding plate 6 can be replaced, if required.
Unscrew the 4 screws 14 completely and re-
move the sanding plate 6. Attach the new sand-
ing plate 6 and tighten the screws again.
Operation
Starting Operation
f Observe correct mains voltage! The voltage
of the power source must agree with the
voltage specified on the nameplate of the
machine. Power tools marked with 230 V
can also be operated with 220 V.
Switching On and Off
To start the machine, press the On/Off switch 1
and keep it depressed.
To lock the pressed On/Off switch 1, press the
lock-on button 2.
To switch off the machine, release the On/Off
switch 1 or when it is locked with the lock-on
button 2, briefly press the On/Off switch 1 and
then release it.
Grain size
For the working of all
wooden materials
40
240
For coarse-sanding, e. g.
of rough, unplaned
beams and boards coarse 40, 60
For face sanding and plan-
ing small irregularities medium
80, 100,
120
For finish and fine sand-
ing of hard woods fine 180, 240
For the working of
paint/enamel coats or
primers and fillers
40
320
For sanding off paint coarse 40, 60
For sanding primer
medium
80, 100,
120
For final sanding of prim-
ers before coating fine
180,
240, 320
Grain size
OBJ_BUCH-384-001.book Page 17 Tuesday, January 22, 2008 8:26 AM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSS 23 A Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSS 23 A Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info