640561
12
Zoom out
Zoom in
Previous page
1/165
Next page
12 | English
1 609 92A 0VX | (22.7.15) Bosch Power Tools
Safety Warnings for Sander
Use the machine only for dry sanding. Penetration of wa-
ter into the machine increases the risk of an electric shock.
Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for dry sanding of wood, plastic, filler
and coated surfaces.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Dust box, complete (Microfilter System)
3 Square base plate (GSS 140-1 A/
GSS 160-1 A Multi)
4 Rectangular base plate (GSS 160-1 A/
GSS 160-1 A Multi)
5 Triangular base plate (GSS 160-1 A Multi)
6 Sanding plate
7 Handle (insulated gripping surface)
8 Screws for base plate (4x)
9 Sanding sheet*
10 Rear clamping bracket
11 Sanding-sheet clamps (2x)
12 Front clamping bracket
13 Perforating tool*
14 Extraction outlet
15 Filter element (Microfilter System)
16 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Orbital sander GSS 140-1 A GSS 160-1 A GSS 160-1 A Multi
Article number
3 601 BA2 1.. 3 601 BA2 2.. 3 601 BA2 2..
Rated power input
W 180 180 180
No-load speed
min
-1
12000 12000 12000
No-load orbital stroke rate
min
-1
24000 24000 24000
Orbit diameter
mm 1.6 1.6 1.6
Sanding sheet dimensions
–square
— Adhesion via Velcro backing
— Attachment via clamping
mm
mm
115 x 107
115 x 140
115 x 107
115 x 140
–rectangular
— Adhesion via Velcro backing mm 133 x 80 133 x 80
–triangular
— Adhesion via Velcro backing
mm 150 x 100
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-2247-001.book Page 12 Wednesday, July 22, 2015 3:01 PM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSS 160 Multi Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSS 160 Multi Professional in the language / languages: All languages as an attachment in your email.

The manual is 8,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info