389348
7
Zoom out
Zoom in
Previous page
1/42
Next page
9
1 ON/OFF switch
2 Sanding plate
3 Sanding sheet
4 Clamping lever
5 Adapter
6 Paper dust bag
7 Vacuum socket
8 Plug
9 Punching tool
10 Tissue dust bag
*
Accessory
Not all of the accessories illustrated or described are in-
cluded as standard delivery.
The machine is intended for the dry sanding of
wood, plastic and filler material as well as painted
surfaces.
Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of the
tool is 75 dB (A). The noise level when working can
exceed 85 dB (A).
Wear ear protection!
The typical weighted acceleration is 3.5 m/s
2
.
Working safely with this machine
is possible only when the
operating and safety information
are read completely and the
instructions contained therein
are strictly followed.
In addition, the general safety instructions in
the enclosed booklet must be followed.
Before using for the first time, ask for a
practical demonstration.
If the cable is damaged or cut through
while working, do not touch the cable
but immediately pull the mains plug.
Never use the machine with a dam-
aged cable.
The dust that is produced while
working is detrimental to health.
Use dust extraction and wear a dust
mask.
Do not work with materials
containing asbestos.
Connect machines that are used in the open via
a residual current circuit breaker with a triggering
current of 30 mA maximum. Use only extension
cables that are intended for outdoor use and are
protected against splash water.
The machine can be used only for dry sanding.
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
Always direct the cable to the rear away from
the machine.
Bosch can assure flawless functioning of
the machine only when original
accessories are used.
Tool Specifications
Orbital Sander GSS 14 GSS 14 A GSS 16 A
Part number 0 601 289 1.. 0 601 289 1.. 0 601 289 0..
Input power 150 W 150 W 150 W
Output power 70 W 70 W 70 W
No-load speed 12 000 min
-1
12 000 min
-1
12 000 min
-1
Oscillations 24 000 min
-1
24 000 min
-1
24 000 min
-1
Oscillation range - ø 2,4 mm 2,4 mm 2,4 mm
Sanding Plate 113 x 105 mm 113 x 105 mm 80 x 130 mm
Sanding sheet (SDS) 80 x 133 mm
Sanding sheet (Standard) 115 x 140mm 115 x 140 mm 80 x 166 mm
Integral dust extraction adapter attachable
Weight (approx. ) 1,3 kg 1,3 kg 1,3 kg
Protection class / II / II / II
Operating Controls
Use as Intended
Noise/Vibration Information
For your Safety
GB
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch gss 16 a at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gss 16 a in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info