Manual Bosch gsr 6-40te (page 10 of 45) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

381188

Zoom out

Zoom in

1/45

English - 2

Observe correct mains voltage: The voltage of

the power source must agree with the voltage

specified on the nameplate of the machine.

Equipment marked with 230 V can also be con-

nected to 220 V.

Switching On and Off

To start the machine press the On/Off switch 6.

The machine runs with variable

speed between 0 and maximum,

depending on the pressure applied

to the On/Off switch 6. Light pres-

sure results in a low rotational

speed thus allowing smooth, con-

trolled starts.

Lock the pushed On/Off switch 6 by pressing the

lock-on button 5.

To switch off the machine, release the On/Off

switch 6 or push and release it then.

Reversing the Rotational Direction

Operate the rotational direction

switch 7 only at a standstill.

Set rotational direction selector 7 to R (right or

clockwise) or L (left or anticlockwise). (Rotational

direction selector 7 is locked when On/Off

switch 6 is activated).

To change the screwdriver blade 1, pull off the

depth stop 2 to the front. The preselected screw-

ing depth is altered as a result.

With the adjustment collar 3, the screwing depth

of the screw head in the material can be prese-

lected in 8 indented steps per revolution (of

0.2 mm each):

Slide the adjustment collar 3 forward to the stop.

Set screwing depth by rotating the adjustment

collar 3:

Clockwise = Increased screwing depth

Counter-clockwise = Decreased screwing depth

Then slide the adjustment collar 3 backward to

the stop.

The required setting can best be determined by a

trial screw driving.

The screw is held by the magnetic universal

holder (Type GSR 6-25 TE / GSR 6-40 TE).

Press the point of the screw firmly against the

material to be screwed until the depth stop 2

rests against the material and the screw driving

insert disengages.

To loosen screws, set the reversing switch 7 to

counter-clockwise and pull off the depth stop 2 to

the front.

With the belt clip 4, the machine can be hung

onto a belt. The user has both hands free and the

machine is always at hand.

Before any work on the machine itself, pull

the mains plug.

For safe and proper working, always keep the

machine and the ventilation slots clean.

If the machine should fail despite the care taken

in manufacturing and testing procedures, repair

should be carried out by an after-sales service

centre for Bosch power tools.

In all correspondence and spare parts orders,

please always include the 10-digit order number

given on the nameplate of the machine.

WARNING! Important instructions for con-

necting a new 3-pin plug to the 2-wire cable.

The wires in the cable are coloured according to

the following code:

Do not

connect the blue or brown wire to the

earth terminal of the plug.

Important: If for any reason the moulded plug is

removed from the cable of this machine, it must

be disposed of safely.

Initial Operation

Changing the Tool

Depth Stop

Belt clip

Maintenance and Cleaning

strain relief

live = brown

neutral = blue

To be fitted

by qualified

professional only

10 • 3 609 929 623 • TMS • 14.03.03

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gsr 6-40te in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gsr 6-40te Manual

Product: