Manual Bosch gsr 12 0 vsh 2 (page 23 of 279) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

381287

Zoom out

Zoom in

1/279

English | 23

Bosch Power Tools 2 609 932 649 | (17.8.09)

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Operation

Starting Operation

Inserting the Battery

f Use only original Bosch O-pack batteries

with the voltage given on the type plate of

your machine. The use of other batteries can

lead to injuries and danger of fire.

Set the rotational direction switch 9 to the cen-

tre position in order to avoid unintentional start-

ing. Insert the charged battery 7 into the handle

so that it can be felt to engage and faces flush

against the handle.

Reversing the Rotational Direction

(see figure F)

The rotational direction switch 9 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 10 actuated.

Right Rotation: For drilling and driving in

screws, push the rotational direction switch 9

left to the stop.

Left Rotation: For loosening or unscrewing

screws, push the rotational direction switch 9

right to the stop.

Setting the Torque

With the torque presetting ring 2 the required

torque setting can be preselected in 25 steps.

With the correct setting, the insert tool is

stopped as soon as the screw is screwed flush

into the material or when the adjusted torque is

reached. The safety clutch is deactivated in the

“ ” position, e. g. for drilling.

Select a higher setting or switch to the

“ ” symbol when unscrewing screws.

Setting range 1–20:

Lower torque for screwing in screws with small

diameter or into soft materials. Fine torque gra-

dients between the individual setting positions.

Setting range 21–25:

Higher torque for screwing in screws with large di-

ameters or into hard materials. Coarse torque gra-

dients between the individual setting positions.

Setting the Operating Mode (GSB 12 VE-2/

GSB 14,4 VE-2/GSB 18 VE-2) (see figure G)

With the operating mode preselection ring 4,

you can select between drilling/screwdriving

and impact drilling.

Drilling and screwdriving

Set the preselection ring 4 to the

“Drilling without impact” symbol.

Impact drilling

Set the preselection ring 4 to the

“Impact drilling” symbol.

In the “Impact drilling” position, the safety

clutch is deactivated and the maximum power is

always effective.

Gear Selection, Mechanical

f Actuate the gear selector 3 only when the

machine is at a standstill.

Two speed ranges can be preselected with the

gear selector 3.

Gear I:

Low speed range; for screwdriving or working

with large drilling diameter.

Gear II:

High speed range; for working with small drilling

diameter.

If the gear selector 3 cannot be pushed through

to the stop, lightly turn the drill chuck with drill.

OBJ_BUCH-199-004.book Page 23 Monday, August 17, 2009 8:32 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gsr 12 0 vsh 2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gsr 12 0 vsh 2 Manual

Product: