Manual Bosch GSN 90-34 DK (page 12 of 158) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544367

Zoom out

Zoom in

1/158

1 609 929 Y30 | (16.8.12) Bosch Power Tools

12 | English

Zubehör

Über das komplette Qualitätszubehörprogramm können

Sie sich im Internet unter www.bosch-pt.com oder bei Ih-

rem Fachhändler informieren.

Kundendienst und Kundenberatung

Der Kundendienst beantwortet Ihre Fragen zu Reparatur

und Wartung Ihres Produkts sowie zu Ersatzteilen. Explosi-

onszeichnungen und Informationen zu Ersatzteilen finden

Sie auch unter:

www.bosch-pt.com

Das Bosch-Kundenberater-Team hilft Ihnen gerne bei Fra-

gen zu Kauf, Anwendung und Einstellung von Produkten

und Zubehören.

www.powertool-portal.de, das Internetportal für Hand-

werker und Heimwerker.

www.ewbc.de, der Informations-Pool für Handwerk und

Ausbildung.

Deutschland

Robert Bosch GmbH

Servicezentrum Elektrowerkzeuge

Zur Luhne 2

37589 Kalefeld – Willershausen

Tel. Kundendienst: +49 (1805) 70 74 10*

Fax: +49 (1805) 70 74 11*

(*Festnetzpreis 14 ct/min, höchstens 42 ct/min aus Mobil-

funknetzen)

E-Mail: Servicezentrum.Elektrowerkzeu-

ge@de.bosch.com

Tel. Kundenberatung: +49 (1803) 33 57 99

(Festnetzpreis 9 ct/min, höchstens 42 ct/min aus Mobil-

funknetzen)

Fax: +49 (711) 7 58 19 30

E-Mail: kundenberatung.ew@de.bosch.com

Österreich

Tel.: +43 (01) 7 97 22 20 10

Fax: +43 (01) 7 97 22 20 11

E-Mail: service.elektrowerkzeuge@at.bosch.com

Schweiz

Tel.: +41 (044) 8 47 15 11

Fax: +41 (044) 8 47 15 51

Luxemburg

Tel.: +32 2 588 0589

Fax: +32 2 588 0595

E-Mail: outillage.gereedschap@be.bosch.com

Entsorgung

Druckluftwerkzeug, Zubehör und Verpackung sollten einer

umweltgerechten Wiederverwertung zugeführt werden.

f Entsorgen Sie Schmier- und Reinigungsstoffe um-

weltgerecht. Beachten Sie die gesetzlichen Vor-

schriften.

Wenn Ihr Druckluftwerkzeug nicht mehr gebrauchsfähig

ist, geben Sie es bitte beim Handel ab oder schicken es di-

rekt (bitte ausreichend frankiert) an:

Recyclingzentrum Elektrowerkzeuge

Osteroder Landstr. 3

37589 Kalefeld

Änderungen vorbehalten.

English

Safety Notes

General Safety Rules for Pneumatic Tools

Before installing, operating, repair-

ing, maintaining and replacing ac-

cessories as well as prior to working near by the pneu-

matic tool, please read and observe all instructions.

Failure to follow the following safety warnings may result in

serious injury.

Save all safety warnings and instructions for future ref-

erence, and make them available to the operator.

Work area safety

f Pay attention to surfaces that may have become slip-

pery from using the machine, and to tripping haz-

ards from the pneumatic or hydraulic hose. Slipping,

tripping and falling are main reasons for workplace inju-

ries.

f Do not operate the pneumatic tool in explosive at-

mospheres, such as in the presence of flammable liq-

uids, gases or dusts. While working the workpiece,

sparks can be created which may ignite the dust or

fumes.

f Keep children and bystanders away from your work-

place while operating the pneumatic tool. Distrac-

tions from other persons can cause you to lose control

over the pneumatic tool.

Pneumatic tool safety

f Never direct the airflow against yourself or other

persons close by, and conduct cold air away from

your hands. Compressed air can lead to serious inju-

ries.

f Check the connections and the air supply lines. All

maintenance units, couplers, and hoses should con-

form to the product specifications in terms of pressure

and air volume. Too low pressure impairs the function of

the pneumatic tool; too high pressure can result in ma-

terial damage and personal injury.

f Protect the hoses from kinks, restrictions, solvents,

and sharp edges. Keep the hoses away from heat,

oil, and rotating parts. Immediately replace a dam-

aged hose. A defective air supply line may result in a

wild compressed-air hose and can cause personal inju-

ry. Raised dust or chips may cause serious eye injury.

f Make sure that hose clamps are always tightened

firmly. Loose or damaged hose clamps may result in un-

controlled air escape.

Personal safety

f Stay alert, watch what you are doing, and use com-

mon sense when operating a pneumatic tool. Do not

use a pneumatic tool while tired or under the influ-

ence of drugs, alcohol, or medication. A moment of

inattention while operating a pneumatic tool may result

in personal injury.

f Use personal protective equipment. Always wear

eye protection. Wearing personal protective equip-

ment – such as a respirator, non-skid safety shoes,

hard hat or hearing protection – according to the in-

structions of your employer or as required by the provi-

sions for work and health protection, reduces the risk of

personal injury.

f Prevent unintentional starting. Make sure that the

pneumatic tool is switched off before connecting it

to the air supply, picking it up or carrying it. When

your finger is on the On/Off switch while carrying the

pneumatic tool or when connecting the pneumatic tool

to the air supply while it is switched on, accidents can

occur.

f Remove any adjustment tools before switching on

the pneumatic tool. A wrench or key left attached to a

rotating part of a pneumatic tool may result in personal

injury.

f Do not overreach. Keep proper footing and balance

at all times. This enables better control of the pneumat-

ic tool in unexpected situations.

f Dress properly. Do not wear loose clothing or jewel-

lery. Keep your hair, clothing and gloves away from

moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

f If devices are provided for the connection of dust ex-

traction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

f Do not directly inhale the exhaust air. Avoid expos-

ing the eyes to exhaust air. The pneumatic tool’s ex-

haust air can contain water, oil, metal particles and de-

bris from the compressor. This can cause damage to

one’s health.

Pneumatic tool use and care

f Use the clamping devices or a vice to secure and sup-

port the workpiece. Holding the workpiece by hand or

against your body will not allow for safe operation of the

pneumatic tool.

f Do not overload the pneumatic tool. Use the pneu-

matic tool intended for your work. The correct pneu-

matic tool will do the job better and safer at the rate for

which it is designed.

f Do not use a pneumatic tool that has a defective

On/Off switch. A pneumatic tool that cannot be con-

trolled with the switch is dangerous and must be re-

paired.

f Disconnect the air supply before making any adjust-

ments, changing accessories, or when not using for

extended periods. This safety measure prevents acci-

dental starting of the pneumatic tool.

f Store idle pneumatic tools out of the reach of chil-

dren. Do not allow persons unfamiliar with the pneu-

matic tool or these instructions to operate the de-

vice. Pneumatic tools are dangerous in the hands of

untrained users.

f Maintain the pneumatic tool with care. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

pneumatic tool’s operation. Have damaged parts re-

paired before using the pneumatic tool. Many acci-

dents are caused by poorly maintained pneumatic tools.

f Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

f Use the pneumatic tool, accessories, application

tools, etc. according to these instructions. Take into

consideration the working conditions and the activi-

ties to be carried out. This reduces the development of

dust, vibrations and noise to the greatest extent.

f The pneumatic tool should be set up, adjusted or

used exclusively by qualified and trained operators.

f The pneumatic tool may not be modified in any way.

Modifications can reduce the effectivity of the safety

measures and increase the risks for the operator.

Service

f Have your pneumatic tool repaired only through a

qualified repair person and only using original re-

placement parts. This will ensure that the safety of the

pneumatic tool is maintained.

Im Gegensatz zum Arbeiten mit einer normalen Arbeitsge-

schwindigkeit, werden bei einer schnellen Arbeitsgeschwin-

digkeit die Nägel nicht genügend tief eingeschossen.

Der lichte Durchmesser des Zuluftschlauchs ist zu gering. – Verwenden Sie einen Zuluftschlauch mit den richtigen

Abmessungen.

(siehe „Technische Daten“, Seite 8)

Der Kompressor ist untauglich für schnelle Arbeitsgeschwin-

digkeiten.

– Verwenden Sie einen Kompressor, der für die Anzahl

an angeschlossenen Druckluftwerkzeugen und die Ar-

beitsgeschwindigkeit ausreichend dimensioniert ist.

Problem Ursache Abhilfe

WARNING

OBJ_BUCH-1037-004.book Page 12 Thursday, August 16, 2012 4:34 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSN 90-34 DK in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSN 90-34 DK Manual

Product: