Manual Bosch GSM 200 Professional (page 17 of 96) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

592523

Zoom out

Zoom in

1/96

18 | English

1 609 929 V05 | (9.3.10) Bosch Power Tools

Assembly

f Before any work on the machine itself, pull

the mains plug.

Bolt the machine to a workbench/bench top

with suitable screws via the 4 holes intended for

this.

Mounting the Spark Guard/Workpiece

Support (see figures A

–D)

f Use the machine only with the spark guard

9. Sparks being expelled can injure your eyes

or set objects in the vicinity on fire.

Mount the holder for the spark guard 8 with the

two screws.

Screw the spark guard 9 to the holder of the

spark guard 8.

Mount the workpiece support 10 as shown in

the figure.

f Regularly check the clearance between the

workpiece support 10 as well as the holder

of the spark guard 8 to the grinding wheel,

and readjust as required. The clearance to

the grinding wheel may not exceed 2 mm.

When the clearance is larger, you are not suf-

ficiently protected against sparking. The

workpiece can be drawn in by the rotational

motion of the grinding wheel and lead to in-

juries.

Replace the grinding wheel when the holder of

the spark guard 8 can no longer be adjusted to

the required clearance of 2 mm (max.) to the

grinding wheel.

Power supply (GSM 200 D)

(Three-Phase Current)

f Have the power tool connected to the

mains supply only through a qualified elec-

trician. The machine is provided without a

mains plug. When connecting, pay attention

to the correct rotation direction of the power

tool.

Changing a Grinding Wheel

f The rated speed of the accessory must be at

least equal to the maximum speed marked

on the power tool. Accessories running fast-

er than their rated speed can break and fly

apart.

Replace the grinding wheel as soon as its resid-

ual material reaches a thickness of 10 mm.

Loosen the 3 screws of cover 1 and remove cov-

er 1. Hold the grinder spindle 5 in place with an

open-end spanner (size 7 mm) and unscrew

clamping nut 2.

Note: The grinder spindle 5 on the left side of

the machine has a left-hand thread.

Remove the clamping flange 3 and the grinding

wheel 5 from the grinder spindle.

The new grinding wheel is mounted in reverse

order. Place the cover 1 firmly onto the housing

and tighten with the 3 screws.

Dress used and out-of-centre grinding discs

with a whetstone (accessory) before continuing

to use them.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

OBJ_BUCH-1114-001.book Page 18 Tuesday, March 9, 2010 1:07 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSM 200 Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSM 200 Professional Manual

Product: